[FFmpeg-cvslog] r28351 - trunk/libswscale/swscale.c

diego subversion
Sun Jan 25 12:57:18 CET 2009


Author: diego
Date: Sun Jan 25 12:57:17 2009
New Revision: 28351

Log:
spelling/grammar cosmetics

Modified:
   trunk/libswscale/swscale.c

Modified: trunk/libswscale/swscale.c
==============================================================================
--- trunk/libswscale/swscale.c	Sun Jan 25 12:33:35 2009	(r28350)
+++ trunk/libswscale/swscale.c	Sun Jan 25 12:57:17 2009	(r28351)
@@ -46,7 +46,7 @@ tested special converters (most are test
  YVU9 -> YV12
 
 untested special converters
-  YV12/I420 -> BGR15/BGR24/BGR32 (it is the yuv2rgb stuff, so it should be ok)
+  YV12/I420 -> BGR15/BGR24/BGR32 (it is the yuv2rgb stuff, so it should be OK)
   YV12/I420 -> YV12/I420
   YUY2/BGR15/BGR24/BGR32/RGB24/RGB32 -> same format
   BGR24 -> BGR32 & RGB24 -> RGB32
@@ -89,9 +89,9 @@ unsigned swscale_version(void)
 //#define WORDS_BIGENDIAN
 #define DITHER1XBPP
 
-#define FAST_BGR2YV12 // use 7 bit coeffs instead of 15bit
+#define FAST_BGR2YV12 // use 7 bit coefficients instead of 15 bit
 
-#define RET 0xC3 //near return opcode for X86
+#define RET 0xC3 //near return opcode for x86
 
 #ifdef M_PI
 #define PI M_PI
@@ -194,10 +194,10 @@ Special versions: fast Y 1:1 scaling (no
 TODO
 more intelligent misalignment avoidance for the horizontal scaler
 write special vertical cubic upscale version
-Optimize C code (yv12 / minmax)
-add support for packed pixel yuv input & output
+optimize C code (YV12 / minmax)
+add support for packed pixel YUV input & output
 add support for Y8 output
-optimize bgr24 & bgr32
+optimize BGR24 & BGR32
 add BGR4 output support
 write special BGR->BGR scaler
 */
@@ -471,7 +471,7 @@ static inline void yuv2yuvXinC(int16_t *
                                int16_t *chrFilter, int16_t **chrSrc, int chrFilterSize,
                                uint8_t *dest, uint8_t *uDest, uint8_t *vDest, int dstW, int chrDstW)
 {
-    //FIXME Optimize (just quickly writen not opti..)
+    //FIXME Optimize (just quickly written not optimized..)
     int i;
     for (i=0; i<dstW; i++)
     {
@@ -504,7 +504,7 @@ static inline void yuv2nv12XinC(int16_t 
                                 int16_t *chrFilter, int16_t **chrSrc, int chrFilterSize,
                                 uint8_t *dest, uint8_t *uDest, int dstW, int chrDstW, int dstFormat)
 {
-    //FIXME Optimize (just quickly writen not opti..)
+    //FIXME Optimize (just quickly written not optimized..)
     int i;
     for (i=0; i<dstW; i++)
     {
@@ -653,7 +653,7 @@ static inline void yuv2nv12XinC(int16_t 
         }
 
 #define YSCALE_YUV_2_RGBX_C(type) \
-    YSCALE_YUV_2_PACKEDX_C(type)  /* FIXME fix tables so that cliping is not needed and then use _NOCLIP*/\
+    YSCALE_YUV_2_PACKEDX_C(type)  /* FIXME fix tables so that clipping is not needed and then use _NOCLIP*/\
     r = (type *)c->table_rV[V];   \
     g = (type *)(c->table_gU[U] + c->table_gV[V]); \
     b = (type *)c->table_bU[U];   \
@@ -953,7 +953,7 @@ static inline void yuv2rgbXinC_full(SwsC
     }
 }
 
-//Note: we have C, X86, MMX, MMX2, 3DNOW version therse no 3DNOW+MMX2 one
+//Note: we have C, X86, MMX, MMX2, 3DNOW versions, there is no 3DNOW+MMX2 one
 //Plain C versions
 #if !HAVE_MMX || defined (RUNTIME_CPUDETECT) || !CONFIG_GPL
 #define COMPILE_C
@@ -1004,7 +1004,7 @@ static inline void yuv2rgbXinC_full(SwsC
 
 #if ARCH_X86
 
-//X86 versions
+//x86 versions
 /*
 #undef RENAME
 #undef HAVE_MMX
@@ -1055,7 +1055,7 @@ static inline void yuv2rgbXinC_full(SwsC
 
 #endif //ARCH_X86
 
-// minor note: the HAVE_xyz is messed up after that line so don't use it
+// minor note: the HAVE_xyz are messed up after this line so don't use them
 
 static double getSplineCoeff(double a, double b, double c, double d, double dist)
 {
@@ -1085,7 +1085,7 @@ static inline int initFilter(int16_t **o
         __asm__ volatile("emms\n\t"::: "memory"); //FIXME this should not be required but it IS (even for non-MMX versions)
 #endif
 
-    // Note the +1 is for the MMXscaler which reads over the end
+    // NOTE: the +1 is for the MMX scaler which reads over the end
     *filterPos = av_malloc((dstW+1)*sizeof(int16_t));
 
     if (FFABS(xInc - 0x10000) <10) // unscaled
@@ -1134,7 +1134,7 @@ static inline int initFilter(int16_t **o
             int j;
 
             (*filterPos)[i]= xx;
-                //Bilinear upscale / linear interpolate / Area averaging
+                //bilinear upscale / linear interpolate / area averaging
                 for (j=0; j<filterSize; j++)
                 {
                     int64_t coeff= fone - FFABS((xx<<16) - xDstInSrc)*(fone>>16);
@@ -1315,7 +1315,7 @@ static inline int initFilter(int16_t **o
             /* preserve monotonicity because the core can't handle the filter otherwise */
             if (i<dstW-1 && (*filterPos)[i] >= (*filterPos)[i+1]) break;
 
-            // Move filter coeffs left
+            // move filter coefficients left
             for (k=1; k<filter2Size; k++)
                 filter2[i*filter2Size + k - 1]= filter2[i*filter2Size + k];
             filter2[i*filter2Size + k - 1]= 0;
@@ -1341,10 +1341,10 @@ static inline int initFilter(int16_t **o
         if (minFilterSize < 5)
             filterAlign = 4;
 
-        // we really don't want to waste our time
-        // doing useless computation, so fall-back on
-        // the scalar C code for very small filter.
-        // vectorizing is worth it only if you have
+        // We really don't want to waste our time
+        // doing useless computation, so fall back on
+        // the scalar C code for very small filters.
+        // Vectorizing is worth it only if you have a
         // decent-sized vector.
         if (minFilterSize < 3)
             filterAlign = 1;
@@ -1381,7 +1381,7 @@ static inline int initFilter(int16_t **o
     }
 
 
-    //FIXME try to align filterpos if possible
+    //FIXME try to align filterPos if possible
 
     //fix borders
     for (i=0; i<dstW; i++)
@@ -1389,7 +1389,7 @@ static inline int initFilter(int16_t **o
         int j;
         if ((*filterPos)[i] < 0)
         {
-            // Move filter coeffs left to compensate for filterPos
+            // move filter coefficients left to compensate for filterPos
             for (j=1; j<filterSize; j++)
             {
                 int left= FFMAX(j + (*filterPos)[i], 0);
@@ -1402,7 +1402,7 @@ static inline int initFilter(int16_t **o
         if ((*filterPos)[i] + filterSize > srcW)
         {
             int shift= (*filterPos)[i] + filterSize - srcW;
-            // Move filter coeffs right to compensate for filterPos
+            // move filter coefficients right to compensate for filterPos
             for (j=filterSize-2; j>=0; j--)
             {
                 int right= FFMIN(j + shift, filterSize-1);
@@ -1413,11 +1413,11 @@ static inline int initFilter(int16_t **o
         }
     }
 
-    // Note the +1 is for the MMXscaler which reads over the end
+    // Note the +1 is for the MMX scaler which reads over the end
     /* align at 16 for AltiVec (needed by hScale_altivec_real) */
     *outFilter= av_mallocz(*outFilterSize*(dstW+1)*sizeof(int16_t));
 
-    /* Normalize & Store in outFilter */
+    /* normalize & store in outFilter */
     for (i=0; i<dstW; i++)
     {
         int j;
@@ -2075,7 +2075,7 @@ static uint16_t roundToInt16(int64_t f){
 }
 
 /**
- * @param inv_table the yuv2rgb coeffs, normally Inverse_Table_6_9[x]
+ * @param inv_table the yuv2rgb coefficients, normally Inverse_Table_6_9[x]
  * @param fullRange if 1 then the luma range is 0..255 if 0 it is 16..235
  * @return -1 if not supported
  */
@@ -2242,7 +2242,7 @@ SwsContext *sws_getContext(int srcW, int
                 |SWS_BICUBLIN);
     if(!i || (i & (i-1)))
     {
-        av_log(NULL, AV_LOG_ERROR, "swScaler: Exactly one scaler algorithm must be choosen\n");
+        av_log(NULL, AV_LOG_ERROR, "swScaler: Exactly one scaler algorithm must be chosen\n");
         return NULL;
     }
 
@@ -2254,7 +2254,7 @@ SwsContext *sws_getContext(int srcW, int
         return NULL;
     }
     if(srcW > VOFW || dstW > VOFW){
-        av_log(NULL, AV_LOG_ERROR, "swScaler: Compile time max width is "AV_STRINGIFY(VOFW)" change VOF/VOFW and recompile\n");
+        av_log(NULL, AV_LOG_ERROR, "swScaler: Compile-time maximum width is "AV_STRINGIFY(VOFW)" change VOF/VOFW and recompile\n");
         return NULL;
     }
 
@@ -2288,14 +2288,14 @@ SwsContext *sws_getContext(int srcW, int
     getSubSampleFactors(&c->chrSrcHSubSample, &c->chrSrcVSubSample, srcFormat);
     getSubSampleFactors(&c->chrDstHSubSample, &c->chrDstVSubSample, dstFormat);
 
-    // reuse chroma for 2 pixles rgb/bgr unless user wants full chroma interpolation
+    // reuse chroma for 2 pixels RGB/BGR unless user wants full chroma interpolation
     if ((isBGR(dstFormat) || isRGB(dstFormat)) && !(flags&SWS_FULL_CHR_H_INT)) c->chrDstHSubSample=1;
 
     // drop some chroma lines if the user wants it
     c->vChrDrop= (flags&SWS_SRC_V_CHR_DROP_MASK)>>SWS_SRC_V_CHR_DROP_SHIFT;
     c->chrSrcVSubSample+= c->vChrDrop;
 
-    // drop every 2. pixel for chroma calculation unless user wants full chroma
+    // drop every other pixel for chroma calculation unless user wants full chroma
     if ((isBGR(srcFormat) || isRGB(srcFormat)) && !(flags&SWS_FULL_CHR_H_INP)
       && srcFormat!=PIX_FMT_RGB8      && srcFormat!=PIX_FMT_BGR8
       && srcFormat!=PIX_FMT_RGB4      && srcFormat!=PIX_FMT_BGR4
@@ -2322,7 +2322,7 @@ SwsContext *sws_getContext(int srcW, int
 
     sws_setColorspaceDetails(c, Inverse_Table_6_9[SWS_CS_DEFAULT], srcRange, Inverse_Table_6_9[SWS_CS_DEFAULT] /* FIXME*/, dstRange, 0, 1<<16, 1<<16);
 
-    /* unscaled special Cases */
+    /* unscaled special cases */
     if (unscaled && !usesHFilter && !usesVFilter && (srcRange == dstRange || isBGR(dstFormat) || isRGB(dstFormat)))
     {
         /* yv12_to_nv12 */
@@ -2348,7 +2348,7 @@ SwsContext *sws_getContext(int srcW, int
         if (srcFormat==PIX_FMT_BGR24 && dstFormat==PIX_FMT_YUV420P && !(flags & SWS_ACCURATE_RND))
             c->swScale= bgr24toyv12Wrapper;
 
-        /* rgb/bgr -> rgb/bgr (no dither needed forms) */
+        /* RGB/BGR -> RGB/BGR (no dither needed forms) */
         if (  (isBGR(srcFormat) || isRGB(srcFormat))
            && (isBGR(dstFormat) || isRGB(dstFormat))
            && srcFormat != PIX_FMT_BGR8      && dstFormat != PIX_FMT_BGR8
@@ -2448,7 +2448,7 @@ SwsContext *sws_getContext(int srcW, int
         if (!c->canMMX2BeUsed && dstW >=srcW && (srcW&15)==0 && (flags&SWS_FAST_BILINEAR))
         {
             if (flags&SWS_PRINT_INFO)
-                av_log(c, AV_LOG_INFO, "output Width is not a multiple of 32 -> no MMX2 scaler\n");
+                av_log(c, AV_LOG_INFO, "output width is not a multiple of 32 -> no MMX2 scaler\n");
         }
         if (usesHFilter) c->canMMX2BeUsed=0;
     }
@@ -2471,7 +2471,7 @@ SwsContext *sws_getContext(int srcW, int
             c->lumXInc+= 20;
             c->chrXInc+= 20;
         }
-        //we don't use the x86asm scaler if mmx is available
+        //we don't use the x86 asm scaler if MMX is available
         else if (flags & SWS_CPU_CAPS_MMX)
         {
             c->lumXInc = ((srcW-2)<<16)/(dstW-2) - 20;
@@ -2517,7 +2517,7 @@ SwsContext *sws_getContext(int srcW, int
             initMMX2HScaler(c->chrDstW, c->chrXInc, c->funnyUVCode, c->chrMmx2Filter, c->chrMmx2FilterPos, 4);
         }
 #endif /* defined(COMPILE_MMX2) */
-    } // Init Horizontal stuff
+    } // initialize horizontal stuff
 
 
 
@@ -2557,7 +2557,7 @@ SwsContext *sws_getContext(int srcW, int
 #endif
     }
 
-    // Calculate Buffer Sizes so that they won't run out while handling these damn slices
+    // calculate buffer sizes so that they won't run out while handling these damn slices
     c->vLumBufSize= c->vLumFilterSize;
     c->vChrBufSize= c->vChrFilterSize;
     for (i=0; i<dstH; i++)
@@ -2577,7 +2577,7 @@ SwsContext *sws_getContext(int srcW, int
     // allocate pixbufs (we use dynamic allocation because otherwise we would need to
     c->lumPixBuf= av_malloc(c->vLumBufSize*2*sizeof(int16_t*));
     c->chrPixBuf= av_malloc(c->vChrBufSize*2*sizeof(int16_t*));
-    //Note we need at least one pixel more at the end because of the mmx code (just in case someone wanna replace the 4000/8000)
+    //Note we need at least one pixel more at the end because of the MMX code (just in case someone wanna replace the 4000/8000)
     /* align at 16 bytes for AltiVec */
     for (i=0; i<c->vLumBufSize; i++)
         c->lumPixBuf[i]= c->lumPixBuf[i+c->vLumBufSize]= av_mallocz(VOF+1);
@@ -2668,7 +2668,7 @@ SwsContext *sws_getContext(int srcW, int
         else
         {
 #if ARCH_X86
-            av_log(c, AV_LOG_VERBOSE, "using X86-Asm scaler for horizontal scaling\n");
+            av_log(c, AV_LOG_VERBOSE, "using x86 asm scaler for horizontal scaling\n");
 #else
             if (flags & SWS_FAST_BILINEAR)
                 av_log(c, AV_LOG_VERBOSE, "using FAST_BILINEAR C scaler for horizontal scaling\n");
@@ -2695,22 +2695,22 @@ SwsContext *sws_getContext(int srcW, int
         }
 
         if (dstFormat==PIX_FMT_BGR24)
-            av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR24 Converter\n",
+            av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR24 converter\n",
                    (flags & SWS_CPU_CAPS_MMX2) ? "MMX2" : ((flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C"));
         else if (dstFormat==PIX_FMT_RGB32)
-            av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR32 Converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C");
+            av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR32 converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C");
         else if (dstFormat==PIX_FMT_BGR565)
-            av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR16 Converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C");
+            av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR16 converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C");
         else if (dstFormat==PIX_FMT_BGR555)
-            av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR15 Converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C");
+            av_log(c, AV_LOG_VERBOSE, "using %s YV12->BGR15 converter\n", (flags & SWS_CPU_CAPS_MMX) ? "MMX" : "C");
 
         av_log(c, AV_LOG_VERBOSE, "%dx%d -> %dx%d\n", srcW, srcH, dstW, dstH);
     }
     if (flags & SWS_PRINT_INFO)
     {
-        av_log(c, AV_LOG_DEBUG, "Lum srcW=%d srcH=%d dstW=%d dstH=%d xInc=%d yInc=%d\n",
+        av_log(c, AV_LOG_DEBUG, "lum srcW=%d srcH=%d dstW=%d dstH=%d xInc=%d yInc=%d\n",
                c->srcW, c->srcH, c->dstW, c->dstH, c->lumXInc, c->lumYInc);
-        av_log(c, AV_LOG_DEBUG, "Chr srcW=%d srcH=%d dstW=%d dstH=%d xInc=%d yInc=%d\n",
+        av_log(c, AV_LOG_DEBUG, "chr srcW=%d srcH=%d dstW=%d dstH=%d xInc=%d yInc=%d\n",
                c->chrSrcW, c->chrSrcH, c->chrDstW, c->chrDstH, c->chrXInc, c->chrYInc);
     }
 
@@ -2720,7 +2720,7 @@ SwsContext *sws_getContext(int srcW, int
 
 /**
  * swscale wrapper, so we don't need to export the SwsContext.
- * assumes planar YUV to be in YUV order instead of YVU
+ * Assumes planar YUV to be in YUV order instead of YVU.
  */
 int sws_scale(SwsContext *c, uint8_t* src[], int srcStride[], int srcSliceY,
               int srcSliceH, uint8_t* dst[], int dstStride[]){
@@ -2820,7 +2820,7 @@ int sws_scale(SwsContext *c, uint8_t* sr
 }
 
 /**
- * swscale wrapper, so we don't need to export the SwsContext
+ * swscale wrapper, so we don't need to export the SwsContext.
  */
 int sws_scale_ordered(SwsContext *c, uint8_t* src[], int srcStride[], int srcSliceY,
                       int srcSliceH, uint8_t* dst[], int dstStride[]){
@@ -2886,8 +2886,8 @@ SwsFilter *sws_getDefaultFilter(float lu
 }
 
 /**
- * returns a normalized gaussian curve used to filter stuff
- * quality=3 is high quality, lowwer is lowwer quality
+ * Returns a normalized Gaussian curve used to filter stuff
+ * quality=3 is high quality, lower is lower quality.
  */
 SwsVector *sws_getGaussianVec(double variance, double quality){
     const int length= (int)(variance*quality + 0.5) | 1;
@@ -3168,7 +3168,7 @@ void sws_freeContext(SwsContext *c){
 /**
  * Checks if context is valid or reallocs a new one instead.
  * If context is NULL, just calls sws_getContext() to get a new one.
- * Otherwise, checks if the parameters are the same already saved in context.
+ * Otherwise, checks if the parameters are the ones already saved in context.
  * If that is the case, returns the current context.
  * Otherwise, frees context and gets a new one.
  *




More information about the ffmpeg-cvslog mailing list