[FFmpeg-cvslog] doc/muxers: tee muxer - rearrange, add notes and general tidy-up

Gyan Doshi git at videolan.org
Thu Apr 19 15:17:09 EEST 2018


ffmpeg | branch: master | Gyan Doshi <ffmpeg at gyani.pro> | Thu Apr 19 17:55:20 2018 +0530| [424836505fba3b9ad8120cd86227f832fe35d8f6] | committer: Gyan Doshi

doc/muxers: tee muxer - rearrange, add notes and general tidy-up

> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=424836505fba3b9ad8120cd86227f832fe35d8f6
---

 doc/muxers.texi | 81 +++++++++++++++++++++++++++++++++------------------------
 1 file changed, 47 insertions(+), 34 deletions(-)

diff --git a/doc/muxers.texi b/doc/muxers.texi
index a10bd95493..6f03bbaa9e 100644
--- a/doc/muxers.texi
+++ b/doc/muxers.texi
@@ -2037,20 +2037,35 @@ ffmpeg -re -i ... -c:v libx264 -c:a aac -f fifo -fifo_format flv -map 0:v -map 0
 @anchor{tee}
 @section tee
 
-The tee muxer can be used to write the same data to several files or any
-other kind of muxer. It can be used, for example, to both stream a video to
-the network and save it to disk at the same time.
+The tee muxer can be used to write the same data to several outputs, such as files or streams.
+It can be used, for example, to stream a video over a network and save it to disk at the same time.
 
 It is different from specifying several outputs to the @command{ffmpeg}
-command-line tool because the audio and video data will be encoded only once
-with the tee muxer; encoding can be a very expensive process. It is not
-useful when using the libavformat API directly because it is then possible
-to feed the same packets to several muxers directly.
+command-line tool. With the tee muxer, the audio and video data will be encoded only once.
+With conventional multiple outputs, multiple encoding operations in parallel are initiated,
+which can be a very expensive process. The tee muxer is not useful when using the libavformat API
+directly because it is then possible to feed the same packets to several muxers directly.
+
+Since the tee muxer does not represent any particular output format, ffmpeg cannot auto-select
+output streams. So all streams intended for output must be specified using @code{-map}. See
+the examples below.
+
+Some encoders may need different options depending on the output format;
+the auto-detection of this can not work with the tee muxer, so they need to be explicitly specified.
+The main example is the @option{global_header} flag.
+
+The slave outputs are specified in the file name given to the muxer,
+separated by '|'. If any of the slave name contains the '|' separator,
+leading or trailing spaces or any special character, those must be
+escaped (see @ref{quoting_and_escaping,,the "Quoting and escaping"
+section in the ffmpeg-utils(1) manual,ffmpeg-utils}).
+
+ at subsection Options
 
 @table @option
 
 @item use_fifo @var{bool}
-If set to 1, slave outputs will be processed in separate thread using @ref{fifo}
+If set to 1, slave outputs will be processed in separate threads using the @ref{fifo}
 muxer. This allows to compensate for different speed/latency/reliability of
 outputs and setup transparent recovery. By default this feature is turned off.
 
@@ -2059,12 +2074,6 @@ Options to pass to fifo pseudo-muxer instances. See @ref{fifo}.
 
 @end table
 
-The slave outputs are specified in the file name given to the muxer,
-separated by '|'. If any of the slave name contains the '|' separator,
-leading or trailing spaces or any special character, it must be
-escaped (see @ref{quoting_and_escaping,,the "Quoting and escaping"
-section in the ffmpeg-utils(1) manual,ffmpeg-utils}).
-
 Muxer options can be specified for each slave by prepending them as a list of
 @var{key}=@var{value} pairs separated by ':', between square brackets. If
 the options values contain a special character or the ':' separator, they
@@ -2073,13 +2082,27 @@ must be escaped; note that this is a second level escaping.
 The following special options are also recognized:
 @table @option
 @item f
-Specify the format name. Useful if it cannot be guessed from the
-output name suffix.
+Specify the format name. Required if it cannot be guessed from the
+output URL.
 
 @item bsfs[/@var{spec}]
 Specify a list of bitstream filters to apply to the specified
 output.
 
+It is possible to specify to which streams a given bitstream filter
+applies, by appending a stream specifier to the option separated by
+ at code{/}. @var{spec} must be a stream specifier (see @ref{Format
+stream specifiers}).
+
+If the stream specifier is not specified, the bitstream filters will be
+applied to all streams in the output. This will cause that output operation
+to fail if the output contains streams to which the bitstream filter cannot
+be applied e.g. @code{h264_mp4toannexb} being applied to an output containing an audio stream.
+
+Options for a bitstream filter must be specified in the form of @code{opt=value}.
+
+Several bitstream filters can be specified, separated by ",".
+
 @item use_fifo @var{bool}
 This allows to override tee muxer use_fifo option for individual slave muxer.
 
@@ -2087,19 +2110,13 @@ This allows to override tee muxer use_fifo option for individual slave muxer.
 This allows to override tee muxer fifo_options for individual slave muxer.
 See @ref{fifo}.
 
-It is possible to specify to which streams a given bitstream filter
-applies, by appending a stream specifier to the option separated by
- at code{/}. @var{spec} must be a stream specifier (see @ref{Format
-stream specifiers}).  If the stream specifier is not specified, the
-bitstream filters will be applied to all streams in the output.
-
-Several bitstream filters can be specified, separated by ",".
-
 @item select
 Select the streams that should be mapped to the slave output,
 specified by a stream specifier. If not specified, this defaults to
-all the input streams. You may use multiple stream specifiers
-separated by commas (@code{,}) e.g.: @code{a:0,v}
+all the mapped streams. This will cause that output operation to fail
+if the output format does not accept all mapped streams.
+
+You may use multiple stream specifiers separated by commas (@code{,}) e.g.: @code{a:0,v}
 
 @item onfail
 Specify behaviour on output failure. This can be set to either @code{abort} (which is
@@ -2113,7 +2130,7 @@ will continue without being affected.
 @itemize
 @item
 Encode something and both archive it in a WebM file and stream it
-as MPEG-TS over UDP (the streams need to be explicitly mapped):
+as MPEG-TS over UDP:
 @example
 ffmpeg -i ... -c:v libx264 -c:a mp2 -f tee -map 0:v -map 0:a
   "archive-20121107.mkv|[f=mpegts]udp://10.0.1.255:1234/"
@@ -2136,23 +2153,19 @@ option is applied to @file{out.aac} in order to make it contain only
 audio packets.
 @example
 ffmpeg -i ... -map 0 -flags +global_header -c:v libx264 -c:a aac
-       -f tee "[bsfs/v=dump_extra]out.ts|[movflags=+faststart]out.mp4|[select=a]out.aac"
+       -f tee "[bsfs/v=dump_extra=freq=keyframe]out.ts|[movflags=+faststart]out.mp4|[select=a]out.aac"
 @end example
 
 @item
-As below, but select only stream @code{a:1} for the audio output. Note
+As above, but select only stream @code{a:1} for the audio output. Note
 that a second level escaping must be performed, as ":" is a special
 character used to separate options.
 @example
 ffmpeg -i ... -map 0 -flags +global_header -c:v libx264 -c:a aac
-       -f tee "[bsfs/v=dump_extra]out.ts|[movflags=+faststart]out.mp4|[select=\'a:1\']out.aac"
+       -f tee "[bsfs/v=dump_extra=freq=keyframe]out.ts|[movflags=+faststart]out.mp4|[select=\'a:1\']out.aac"
 @end example
 @end itemize
 
-Note: some codecs may need different options depending on the output format;
-the auto-detection of this can not work with the tee muxer. The main example
-is the @option{global_header} flag.
-
 @section webm_dash_manifest
 
 WebM DASH Manifest muxer.



More information about the ffmpeg-cvslog mailing list