[Ffmpeg-devel] [PATCH] simple internal lzo decoder

Reimar Döffinger Reimar.Doeffinger
Tue Jan 10 23:04:22 CET 2006


Hi,
On Tue, Jan 10, 2006 at 10:07:28PM +0100, Reimar D?ffinger wrote:
> the attached patch adds a simple and probably slow LZO decoder to ffmpeg and
> makes the CamStudio decoder use it.

Updated patch, it is simpler to my eyes (at least it got a bit smaller
:-) ), fixes some wrong indentation (I just can't get use to type more that
2 spaces *g*), and compiles it only when the CamStudio decoder is enabled,
since nothing else uses it (yet).

Greetings,
Reimar D?ffinger
-------------- next part --------------
Index: libavcodec/Makefile
===================================================================
RCS file: /cvsroot/ffmpeg/ffmpeg/libavcodec/Makefile,v
retrieving revision 1.219
diff -u -r1.219 Makefile
--- libavcodec/Makefile	9 Jan 2006 15:41:39 -0000	1.219
+++ libavcodec/Makefile	10 Jan 2006 22:01:13 -0000
@@ -169,6 +169,7 @@
 endif
 ifeq ($(CONFIG_CSCD_DECODER),yes)
     OBJS+= cscd.o
+    OBJS+= lzo.o
 endif
 ifeq ($(CONFIG_ULTI_DECODER),yes)
     OBJS+= ulti.o
Index: libavcodec/cscd.c
===================================================================
RCS file: /cvsroot/ffmpeg/ffmpeg/libavcodec/cscd.c,v
retrieving revision 1.1
diff -u -r1.1 cscd.c
--- libavcodec/cscd.c	9 Jan 2006 15:41:39 -0000	1.1
+++ libavcodec/cscd.c	10 Jan 2006 22:01:15 -0000
@@ -25,9 +25,7 @@
 #ifdef CONFIG_ZLIB
 #include <zlib.h>
 #endif
-#ifdef CONFIG_LZO
-#include <lzo1x.h>
-#endif
+#include "lzo.h"
 
 typedef struct {
     AVFrame pic;
@@ -158,16 +156,10 @@
     // decompress data
     switch ((buf[0] >> 1) & 7) {
         case 0: { // lzo compression
-#ifdef CONFIG_LZO
-            unsigned int dlen = c->decomp_size;
-            if (lzo1x_decompress_safe(&buf[2], buf_size - 2,
-                       c->decomp_buf, &dlen, NULL) != LZO_E_OK)
+            int outlen = c->decomp_size, inlen = buf_size - 2;
+            if (lzo1x_decode(c->decomp_buf, &outlen, &buf[2], &inlen))
                 av_log(avctx, AV_LOG_ERROR, "error during lzo decompression\n");
             break;
-#else
-            av_log(avctx, AV_LOG_ERROR, "compiled without lzo (GPL) support\n");
-            return -1;
-#endif
         }
         case 1: { // zlib compression
 #ifdef CONFIG_ZLIB
Index: libavcodec/lzo.c
===================================================================
RCS file: libavcodec/lzo.c
diff -N libavcodec/lzo.c
--- /dev/null	1 Jan 1970 00:00:00 -0000
+++ libavcodec/lzo.c	10 Jan 2006 22:01:15 -0000
@@ -0,0 +1,173 @@
+/*
+ * LZO 1x decompression
+ * Copyright (c) 2006 Reimar Doeffinger
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include "common.h"
+#include "lzo.h"
+
+typedef struct LZOContext {
+    uint8_t *in;
+    int in_remain;
+    uint8_t *out;
+    int out_remain, out_size;
+    int error;
+} LZOContext;
+
+/**
+ * \brief read one byte from input buffer, avoiding overrun
+ * \return byte read
+ */
+static inline int get_byte(LZOContext *c) {
+    int res = c->in[0];
+    if (c->in_remain) {
+        c->in++;
+        c->in_remain--;
+    } else
+        c->error |= LZO_INPUT_DEPLETED;
+    return res;
+}
+
+/**
+ * \brief decode a length value in the coding used by lzo
+ * \param x previous byte value
+ * \param mask bits used from x
+ * \return decoded length value
+ */
+static inline int get_len(LZOContext *c, int x, int mask) {
+    int cnt = x & mask;
+    if (!cnt) {
+        while (!(x = get_byte(c))) cnt += 255;
+        cnt += mask + x;
+    }
+    return cnt;
+}
+
+/**
+ * \brief copy bytes from input to output buffer with checking
+ * \param cnt number of bytes to copy, must be > 0
+ */
+static inline void copy(LZOContext *c, int cnt) {
+    if (cnt > c->in_remain) {
+        cnt = c->in_remain;
+        c->error |= LZO_INPUT_DEPLETED;
+    }
+    if (cnt > c->out_remain) {
+        cnt = c->out_remain;
+        c->error |= LZO_OUTPUT_FULL;
+    }
+    c->in_remain -= cnt;
+    c->out_remain -= cnt;
+    do {
+        *c->out++ = *c->in++;
+    } while (--cnt);
+}
+
+/**
+ * \brief copy previously decoded bytes to current position
+ * \param back how many bytes back we start
+ * \param cnt number of bytes to copy, must be > 0
+ *
+ * cnt > back is valid, this will copy the bytes we just copied.
+ */
+static inline void copy_backptr(LZOContext *c, int back, int cnt) {
+    if (back > c->out_size - c->out_remain) {
+        c->error |= LZO_INVALID_BACKPTR;
+        return;
+    }
+    if (cnt > c->out_remain) {
+        cnt = c->out_remain;
+        c->error |= LZO_OUTPUT_FULL;
+    }
+    c->out_remain -= cnt;
+    do {
+        *c->out++ = c->out[-back];
+    } while (--cnt);
+}
+
+/**
+ * \brief decode LZO 1x compressed data
+ * \param out output buffer
+ * \param outlen size of output buffer, number of bytes left are returned here
+ * \param in input buffer
+ * \param inlen size of input buffer, number of bytes left are returned here
+ * \return 0 on success, otherwise error flags, see lzo.h
+ */
+int lzo1x_decode(void *out, int *outlen, void *in, int *inlen) {
+    enum {COPY, BACKPTR} state = COPY;
+    int x;
+    LZOContext c;
+    c.in = in;
+    c.in_remain = *inlen;
+    c.out = out;
+    c.out_size = c.out_remain = *outlen;
+    c.error = 0;
+    x = get_byte(&c);
+    if (x > 17) {
+        copy(&c, x - 17);
+        x = get_byte(&c);
+        if (x < 16) c.error |= LZO_ERROR;
+    }
+    while (!c.error) {
+        int cnt, back;
+        if (x >> 4) {
+            state = BACKPTR;
+            if (x >> 6) {
+                cnt = (x >> 5) - 1;
+                back = (get_byte(&c) << 3) + ((x >> 2) & 7) + 1;
+            } else if (x >> 5) {
+                cnt = get_len(&c, x, 31);
+                x = get_byte(&c);
+                back = (get_byte(&c) << 6) + (x >> 2) + 1;
+            } else {
+                cnt = get_len(&c, x, 7);
+                back = (1 << 14) + ((x & 8) << 11);
+                x = get_byte(&c);
+                back += (get_byte(&c) << 6) + (x >> 2);
+                if (back == (1 << 14)) {
+                    if (cnt != 1)
+                        c.error |= LZO_ERROR;
+                    break;
+                }
+            }
+        } else
+        switch (state) {
+            case COPY:
+                cnt = get_len(&c, x, 15);
+                copy(&c, cnt + 3);
+                x = get_byte(&c);
+                if (x >> 4)
+                    continue;
+                cnt = 1;
+                back = (1 << 11) + (get_byte(&c) << 2) + (x >> 2) + 1;
+                break;
+            case BACKPTR:
+                cnt = 0;
+                back = (get_byte(&c) << 2) + (x >> 2) + 1;
+                break;
+        }
+        copy_backptr(&c, back, cnt + 2);
+        cnt = x & 3;
+        if (cnt)
+            copy(&c, cnt);
+        else
+            state = (state == COPY) ? BACKPTR : COPY;
+        x = get_byte(&c);
+    }
+    *inlen = c.in_remain;
+    *outlen = c.out_remain;
+    return c.error;
+}
Index: libavcodec/lzo.h
===================================================================
RCS file: libavcodec/lzo.h
diff -N libavcodec/lzo.h
--- /dev/null	1 Jan 1970 00:00:00 -0000
+++ libavcodec/lzo.h	10 Jan 2006 22:01:15 -0000
@@ -0,0 +1,11 @@
+#ifndef _LZO_H
+#define LZO_H
+
+#define LZO_INPUT_DEPLETED 1
+#define LZO_OUTPUT_FULL 2
+#define LZO_INVALID_BACKPTR 4
+#define LZO_ERROR 8
+
+int lzo1x_decode(void *out, int *outlen, void *in, int *inlen);
+
+#endif



More information about the ffmpeg-devel mailing list