[FFmpeg-devel] [PATCH 2/2] swscale/aarch64: add vscale specializations
Swinney, Jonathan
jswinney at amazon.com
Mon Jun 13 19:36:31 EEST 2022
This commit adds new code paths for vscale when filterSize is 2, 4, or
8. By using specialized code with unrolling to match the filterSize we
can improve performance. This patch also corrects the behavor for
filterSize 1 which was previously failing the checkasm test.
On AWS c7g (Graviton 3, Neoverse V1) instances:
before after
yuv2yuvX_2_0_512_neon: 355.1 270.4
yuv2yuvX_4_0_512_neon: 621.4 436.6
yuv2yuvX_8_0_512_neon: 1134.4 817.6
yuv2yuvX_16_0_512_neon: 2071.9 1845.1
Signed-off-by: Jonathan Swinney <jswinney at amazon.com>
---
libswscale/aarch64/output.S | 188 +++++++++++++++++++++++++++++++++--
libswscale/aarch64/swscale.c | 12 +++
2 files changed, 194 insertions(+), 6 deletions(-)
diff --git a/libswscale/aarch64/output.S b/libswscale/aarch64/output.S
index af71de6050..a18e2c7541 100644
--- a/libswscale/aarch64/output.S
+++ b/libswscale/aarch64/output.S
@@ -21,29 +21,48 @@
#include "libavutil/aarch64/asm.S"
function ff_yuv2planeX_8_neon, export=1
+// x0 - const int16_t *filter,
+// x1 - int filterSize,
+// x2 - const int16_t **src,
+// x3 - uint8_t *dest,
+// x4 - int dstW,
+// x5 - const uint8_t *dither,
+// x6 - int offset
+
ld1 {v0.8B}, [x5] // load 8x8-bit dither
+ and w6, w6, #7
cbz w6, 1f // check if offsetting present
ext v0.8B, v0.8B, v0.8B, #3 // honor offsetting which can be 0 or 3 only
1: uxtl v0.8H, v0.8B // extend dither to 16-bit
ushll v1.4S, v0.4H, #12 // extend dither to 32-bit with left shift by 12 (part 1)
ushll2 v2.4S, v0.8H, #12 // extend dither to 32-bit with left shift by 12 (part 2)
+ cmp w1, #8 // if filterSize == 8, branch to specialized version
+ b.eq 6f
+ cmp w1, #4 // if filterSize == 4, branch to specialized version
+ b.eq 8f
+ cmp w1, #2 // if filterSize == 2, branch to specialized version
+ b.eq 10f
+
+// The filter size does not match of the of specialized implementations. It is either even or odd. If it is even
+// then use the first section below.
mov x7, #0 // i = 0
+ tbnz w1, #0, 4f // if filterSize % 2 != 0 branch to specialized version
+// fs % 2 == 0
2: mov v3.16B, v1.16B // initialize accumulator part 1 with dithering value
mov v4.16B, v2.16B // initialize accumulator part 2 with dithering value
mov w8, w1 // tmpfilterSize = filterSize
mov x9, x2 // srcp = src
mov x10, x0 // filterp = filter
3: ldp x11, x12, [x9], #16 // get 2 pointers: src[j] and src[j+1]
+ ldr s7, [x10], #4 // read 2x16-bit coeff X and Y at filter[j] and filter[j+1]
add x11, x11, x7, lsl #1 // &src[j ][i]
add x12, x12, x7, lsl #1 // &src[j+1][i]
ld1 {v5.8H}, [x11] // read 8x16-bit @ src[j ][i + {0..7}]: A,B,C,D,E,F,G,H
ld1 {v6.8H}, [x12] // read 8x16-bit @ src[j+1][i + {0..7}]: I,J,K,L,M,N,O,P
- ld1r {v7.8H}, [x10], #2 // read 1x16-bit coeff X at filter[j ] and duplicate across lanes
- ld1r {v16.8H}, [x10], #2 // read 1x16-bit coeff Y at filter[j+1] and duplicate across lanes
- smlal v3.4S, v5.4H, v7.4H // val0 += {A,B,C,D} * X
- smlal2 v4.4S, v5.8H, v7.8H // val1 += {E,F,G,H} * X
- smlal v3.4S, v6.4H, v16.4H // val0 += {I,J,K,L} * Y
- smlal2 v4.4S, v6.8H, v16.8H // val1 += {M,N,O,P} * Y
+ smlal v3.4S, v5.4H, v7.H[0] // val0 += {A,B,C,D} * X
+ smlal2 v4.4S, v5.8H, v7.H[0] // val1 += {E,F,G,H} * X
+ smlal v3.4S, v6.4H, v7.H[1] // val0 += {I,J,K,L} * Y
+ smlal2 v4.4S, v6.8H, v7.H[1] // val1 += {M,N,O,P} * Y
subs w8, w8, #2 // tmpfilterSize -= 2
b.gt 3b // loop until filterSize consumed
@@ -55,4 +74,161 @@ function ff_yuv2planeX_8_neon, export=1
add x7, x7, #8 // i += 8
b.gt 2b // loop until width consumed
ret
+
+// If filter size is odd (most likely == 1), then use this section.
+// fs % 2 != 0
+4: mov v3.16B, v1.16B // initialize accumulator part 1 with dithering value
+ mov v4.16B, v2.16B // initialize accumulator part 2 with dithering value
+ mov w8, w1 // tmpfilterSize = filterSize
+ mov x9, x2 // srcp = src
+ mov x10, x0 // filterp = filter
+5: ldr x11, [x9], #8 // get 1 pointer: src[j]
+ ldr h6, [x10], #2 // read 1 16 bit coeff X at filter[j]
+ add x11, x11, x7, lsl #1 // &src[j ][i]
+ ld1 {v5.8H}, [x11] // read 8x16-bit @ src[j ][i + {0..7}]: A,B,C,D,E,F,G,H
+ smlal v3.4S, v5.4H, v6.H[0] // val0 += {A,B,C,D} * X
+ smlal2 v4.4S, v5.8H, v6.H[0] // val1 += {E,F,G,H} * X
+ subs w8, w8, #1 // tmpfilterSize -= 2
+ b.gt 5b // loop until filterSize consumed
+
+ sqshrun v3.4h, v3.4s, #16 // clip16(val0>>16)
+ sqshrun2 v3.8h, v4.4s, #16 // clip16(val1>>16)
+ uqshrn v3.8b, v3.8h, #3 // clip8(val>>19)
+ st1 {v3.8b}, [x3], #8 // write to destination
+ subs w4, w4, #8 // dstW -= 8
+ add x7, x7, #8 // i += 8
+ b.gt 4b // loop until width consumed
+ ret
+
+6: // fs=8
+ ldp x5, x6, [x2] // load 2 pointers: src[j ] and src[j+1]
+ ldp x7, x9, [x2, #16] // load 2 pointers: src[j+2] and src[j+3]
+ ldp x10, x11, [x2, #32] // load 2 pointers: src[j+4] and src[j+5]
+ ldp x12, x13, [x2, #48] // load 2 pointers: src[j+6] and src[j+7]
+
+ // load 8x16-bit values for filter[j], where j=0..7
+ ld1 {v6.8H}, [x0]
+7:
+ mov v3.16B, v1.16B // initialize accumulator part 1 with dithering value
+ mov v4.16B, v2.16B // initialize accumulator part 2 with dithering value
+
+ ld1 {v24.8H}, [x5], #16 // load 8x16-bit values for src[j + 0][i + {0..7}]
+ ld1 {v25.8H}, [x6], #16 // load 8x16-bit values for src[j + 1][i + {0..7}]
+ ld1 {v26.8H}, [x7], #16 // load 8x16-bit values for src[j + 2][i + {0..7}]
+ ld1 {v27.8H}, [x9], #16 // load 8x16-bit values for src[j + 3][i + {0..7}]
+ ld1 {v28.8H}, [x10], #16 // load 8x16-bit values for src[j + 4][i + {0..7}]
+ ld1 {v29.8H}, [x11], #16 // load 8x16-bit values for src[j + 5][i + {0..7}]
+ ld1 {v30.8H}, [x12], #16 // load 8x16-bit values for src[j + 6][i + {0..7}]
+ ld1 {v31.8H}, [x13], #16 // load 8x16-bit values for src[j + 7][i + {0..7}]
+
+ smlal v3.4S, v24.4H, v6.H[0] // val0 += src[0][i + {0..3}] * filter[0]
+ smlal2 v4.4S, v24.8H, v6.H[0] // val1 += src[0][i + {4..7}] * filter[0]
+ smlal v3.4S, v25.4H, v6.H[1] // val0 += src[1][i + {0..3}] * filter[1]
+ smlal2 v4.4S, v25.8H, v6.H[1] // val1 += src[1][i + {4..7}] * filter[1]
+ smlal v3.4S, v26.4H, v6.H[2] // val0 += src[2][i + {0..3}] * filter[2]
+ smlal2 v4.4S, v26.8H, v6.H[2] // val1 += src[2][i + {4..7}] * filter[2]
+ smlal v3.4S, v27.4H, v6.H[3] // val0 += src[3][i + {0..3}] * filter[3]
+ smlal2 v4.4S, v27.8H, v6.H[3] // val1 += src[3][i + {4..7}] * filter[3]
+ smlal v3.4S, v28.4H, v6.H[4] // val0 += src[4][i + {0..3}] * filter[4]
+ smlal2 v4.4S, v28.8H, v6.H[4] // val1 += src[4][i + {4..7}] * filter[4]
+ smlal v3.4S, v29.4H, v6.H[5] // val0 += src[5][i + {0..3}] * filter[5]
+ smlal2 v4.4S, v29.8H, v6.H[5] // val1 += src[5][i + {4..7}] * filter[5]
+ smlal v3.4S, v30.4H, v6.H[6] // val0 += src[6][i + {0..3}] * filter[6]
+ smlal2 v4.4S, v30.8H, v6.H[6] // val1 += src[6][i + {4..7}] * filter[6]
+ smlal v3.4S, v31.4H, v6.H[7] // val0 += src[7][i + {0..3}] * filter[7]
+ smlal2 v4.4S, v31.8H, v6.H[7] // val1 += src[7][i + {4..7}] * filter[7]
+
+ sqshrun v3.4h, v3.4s, #16 // clip16(val0>>16)
+ sqshrun2 v3.8h, v4.4s, #16 // clip16(val1>>16)
+ uqshrn v3.8b, v3.8h, #3 // clip8(val>>19)
+ subs w4, w4, #8 // dstW -= 8
+ st1 {v3.8b}, [x3], #8 // write to destination
+ b.gt 7b // loop until width consumed
+ ret
+
+8: // fs=4
+ ldp x5, x6, [x2] // load 2 pointers: src[j ] and src[j+1]
+ ldp x7, x9, [x2, #16] // load 2 pointers: src[j+2] and src[j+3]
+
+ // load 4x16-bit values for filter[j], where j=0..3 and replicated across lanes
+ ld1 {v6.4H}, [x0]
+9:
+ mov v3.16B, v1.16B // initialize accumulator part 1 with dithering value
+ mov v4.16B, v2.16B // initialize accumulator part 2 with dithering value
+
+ ld1 {v24.8H}, [x5], #16 // load 8x16-bit values for src[j + 0][i + {0..7}]
+ ld1 {v25.8H}, [x6], #16 // load 8x16-bit values for src[j + 1][i + {0..7}]
+ ld1 {v26.8H}, [x7], #16 // load 8x16-bit values for src[j + 2][i + {0..7}]
+ ld1 {v27.8H}, [x9], #16 // load 8x16-bit values for src[j + 3][i + {0..7}]
+
+ smlal v3.4S, v24.4H, v6.H[0] // val0 += src[0][i + {0..3}] * filter[0]
+ smlal2 v4.4S, v24.8H, v6.H[0] // val1 += src[0][i + {4..7}] * filter[0]
+ smlal v3.4S, v25.4H, v6.H[1] // val0 += src[1][i + {0..3}] * filter[1]
+ smlal2 v4.4S, v25.8H, v6.H[1] // val1 += src[1][i + {4..7}] * filter[1]
+ smlal v3.4S, v26.4H, v6.H[2] // val0 += src[2][i + {0..3}] * filter[2]
+ smlal2 v4.4S, v26.8H, v6.H[2] // val1 += src[2][i + {4..7}] * filter[2]
+ smlal v3.4S, v27.4H, v6.H[3] // val0 += src[3][i + {0..3}] * filter[3]
+ smlal2 v4.4S, v27.8H, v6.H[3] // val1 += src[3][i + {4..7}] * filter[3]
+
+ sqshrun v3.4h, v3.4s, #16 // clip16(val0>>16)
+ sqshrun2 v3.8h, v4.4s, #16 // clip16(val1>>16)
+ uqshrn v3.8b, v3.8h, #3 // clip8(val>>19)
+ st1 {v3.8b}, [x3], #8 // write to destination
+ subs w4, w4, #8 // dstW -= 8
+ b.gt 9b // loop until width consumed
+ ret
+
+10: // fs=2
+ ldp x5, x6, [x2] // load 2 pointers: src[j ] and src[j+1]
+
+ // load 2x16-bit values for filter[j], where j=0..1 and replicated across lanes
+ ldr s6, [x0]
+11:
+ mov v3.16B, v1.16B // initialize accumulator part 1 with dithering value
+ mov v4.16B, v2.16B // initialize accumulator part 2 with dithering value
+
+ ld1 {v24.8H}, [x5], #16 // load 8x16-bit values for src[j + 0][i + {0..7}]
+ ld1 {v25.8H}, [x6], #16 // load 8x16-bit values for src[j + 1][i + {0..7}]
+
+ smlal v3.4S, v24.4H, v6.H[0] // val0 += src[0][i + {0..3}] * filter[0]
+ smlal2 v4.4S, v24.8H, v6.H[0] // val1 += src[0][i + {4..7}] * filter[0]
+ smlal v3.4S, v25.4H, v6.H[1] // val0 += src[1][i + {0..3}] * filter[1]
+ smlal2 v4.4S, v25.8H, v6.H[1] // val1 += src[1][i + {4..7}] * filter[1]
+
+ sqshrun v3.4h, v3.4s, #16 // clip16(val0>>16)
+ sqshrun2 v3.8h, v4.4s, #16 // clip16(val1>>16)
+ uqshrn v3.8b, v3.8h, #3 // clip8(val>>19)
+ st1 {v3.8b}, [x3], #8 // write to destination
+ subs w4, w4, #8 // dstW -= 8
+ b.gt 11b // loop until width consumed
+ ret
+endfunc
+
+function ff_yuv2plane1_8_neon, export=1
+// x0 - const int16_t *src,
+// x1 - uint8_t *dest,
+// x2 - int dstW,
+// x3 - const uint8_t *dither,
+// x4 - int offset
+ ld1 {v0.8B}, [x3] // load 8x8-bit dither
+ and w4, w4, #7
+ cbz w4, 1f // check if offsetting present
+ ext v0.8B, v0.8B, v0.8B, #3 // honor offsetting which can be 0 or 3 only
+1: uxtl v0.8H, v0.8B // extend dither to 32-bit
+ uxtl v1.4s, v0.4h
+ uxtl2 v2.4s, v0.8h
+2:
+ ld1 {v3.8h}, [x0], #16 // read 8x16-bit @ src[j ][i + {0..7}]: A,B,C,D,E,F,G,H
+ sxtl v4.4s, v3.4h
+ sxtl2 v5.4s, v3.8h
+ add v4.4s, v4.4s, v1.4s
+ add v5.4s, v5.4s, v2.4s
+ sqshrun v4.4h, v4.4s, #6
+ sqshrun2 v4.8h, v5.4s, #6
+
+ uqshrn v3.8b, v4.8h, #1 // clip8(val>>7)
+ subs w2, w2, #8 // dstW -= 8
+ st1 {v3.8b}, [x1], #8 // write to destination
+ b.gt 2b // loop until width consumed
+ ret
endfunc
diff --git a/libswscale/aarch64/swscale.c b/libswscale/aarch64/swscale.c
index ab28be4da6..321d1f844e 100644
--- a/libswscale/aarch64/swscale.c
+++ b/libswscale/aarch64/swscale.c
@@ -39,6 +39,12 @@ ALL_SCALE_FUNCS(neon);
void ff_yuv2planeX_8_neon(const int16_t *filter, int filterSize,
const int16_t **src, uint8_t *dest, int dstW,
const uint8_t *dither, int offset);
+void ff_yuv2plane1_8_neon(
+ const int16_t *src,
+ uint8_t *dest,
+ int dstW,
+ const uint8_t *dither,
+ int offset);
#define ASSIGN_SCALE_FUNC2(hscalefn, filtersize, opt) do { \
if (c->srcBpc == 8 && c->dstBpc <= 14) { \
@@ -54,6 +60,11 @@ void ff_yuv2planeX_8_neon(const int16_t *filter, int filterSize,
ASSIGN_SCALE_FUNC2(hscalefn, X8, opt); \
break; \
}
+#define ASSIGN_VSCALE_FUNC(vscalefn, opt) \
+ switch (c->dstBpc) { \
+ case 8: vscalefn = ff_yuv2plane1_8_ ## opt; break; \
+ default: break; \
+ }
av_cold void ff_sws_init_swscale_aarch64(SwsContext *c)
{
@@ -62,6 +73,7 @@ av_cold void ff_sws_init_swscale_aarch64(SwsContext *c)
if (have_neon(cpu_flags)) {
ASSIGN_SCALE_FUNC(c->hyScale, c->hLumFilterSize, neon);
ASSIGN_SCALE_FUNC(c->hcScale, c->hChrFilterSize, neon);
+ ASSIGN_VSCALE_FUNC(c->yuv2plane1, neon);
if (c->dstBpc == 8) {
c->yuv2planeX = ff_yuv2planeX_8_neon;
}
--
2.32.0
More information about the ffmpeg-devel
mailing list