[FFmpeg-devel] [PATCH v2] avformat: add Software Defined Radio support
Michael Niedermayer
michael at niedermayer.cc
Mon Jun 19 01:28:05 EEST 2023
Signed-off-by: Michael Niedermayer <michael at niedermayer.cc>
---
configure | 4 +
doc/demuxers.texi | 71 ++
libavformat/Makefile | 2 +
libavformat/allformats.c | 2 +
libavformat/sdrdemux.c | 1739 ++++++++++++++++++++++++++++++++++++++
5 files changed, 1818 insertions(+)
create mode 100644 libavformat/sdrdemux.c
diff --git a/configure b/configure
index 4ac7cc6c0b..8896348a30 100755
--- a/configure
+++ b/configure
@@ -269,6 +269,7 @@ External library support:
--enable-libshine enable fixed-point MP3 encoding via libshine [no]
--enable-libsmbclient enable Samba protocol via libsmbclient [no]
--enable-libsnappy enable Snappy compression, needed for hap encoding [no]
+ --enable-libsoapysdr enable SoapySDR, needed for connecting to SDR HW [no]
--enable-libsoxr enable Include libsoxr resampling [no]
--enable-libspeex enable Speex de/encoding via libspeex [no]
--enable-libsrt enable Haivision SRT protocol via libsrt [no]
@@ -1888,6 +1889,7 @@ EXTERNAL_LIBRARY_LIST="
libshine
libsmbclient
libsnappy
+ libsoapysdr
libsoxr
libspeex
libsrt
@@ -3540,6 +3542,7 @@ rtsp_muxer_select="rtp_muxer http_protocol rtp_protocol rtpenc_chain"
sap_demuxer_select="sdp_demuxer"
sap_muxer_select="rtp_muxer rtp_protocol rtpenc_chain"
sdp_demuxer_select="rtpdec"
+sdr_demuxer_deps="libsoapysdr"
smoothstreaming_muxer_select="ismv_muxer"
spdif_demuxer_select="adts_header"
spdif_muxer_select="adts_header"
@@ -6776,6 +6779,7 @@ enabled libshine && require_pkg_config libshine shine shine/layer3.h sh
enabled libsmbclient && { check_pkg_config libsmbclient smbclient libsmbclient.h smbc_init ||
require libsmbclient libsmbclient.h smbc_init -lsmbclient; }
enabled libsnappy && require libsnappy snappy-c.h snappy_compress -lsnappy -lstdc++
+enabled libsoapysdr && require libsoapysdr SoapySDR/Device.h SoapySDRDevice_enumerate -lSoapySDR
enabled libsoxr && require libsoxr soxr.h soxr_create -lsoxr
enabled libssh && require_pkg_config libssh libssh libssh/sftp.h sftp_init
enabled libspeex && require_pkg_config libspeex speex speex/speex.h speex_decoder_init
diff --git a/doc/demuxers.texi b/doc/demuxers.texi
index 2d33b47a56..fa8da99911 100644
--- a/doc/demuxers.texi
+++ b/doc/demuxers.texi
@@ -899,6 +899,77 @@ the script is directly played, the actual times will match the absolute
timestamps up to the sound controller's clock accuracy, but if the user
somehow pauses the playback or seeks, all times will be shifted accordingly.
+ at section sdr / sdrfile
+
+Software Defined Radio Demuxer. The sdr demuxer will demux radio streams
+through the use of a libsoapy compatible software defined radio. sdrfile
+will do the same from a file.
+The short seek forward and backward commands can be used to select the next and
+previous radio stations. Seeking to specific radio stations and similar will be
+supported in the future.
+
+ at table @option
+
+ at item block_size
+size of FFT to use, leave at 0 to choose automatically
+
+ at item mode
+
+ at table @samp
+
+ at item single_mode
+Demodulate 1 station
+
+ at item all_mode
+Demodulate all stations in view
+
+ at end table
+
+ at item station_freq
+Initial station to pick, if multiple are probed.
+
+ at item driver
+libsoapy driver to use. Leave empty to attempt autodetection.
+
+ at item sdr_sr
+SDR sample rate, this must be a value supported by the hardware. Leave 0 to attempt
+autodetection
+
+ at item sdr_freq
+initial SDR center frequency, this must be a value supported by the hardware
+
+ at item min_freq
+Minimum frequency, leave at 0 for autodetection
+
+ at item max_freq
+Maximum frequency, leave at 0 for autodetection
+
+ at item dumpurl
+URL to dump RAW SDR stream to, this can be played back later with sdrfile. Useful
+for debuging.
+
+ at item kbd_alpha
+Kaiser Bessel derived window parameter
+
+ at item am_mode
+AM Demodulation method. Several different methods are supported.
+ at table @samp
+ at item am_inphase
+Demodulate mono signal that is in phase with the carrier. This works well if there is one
+transmitter at the frequency and there is nothing disturbing the signal.
+
+ at item am_midside
+Demodulate AM into a stereo signal so that the mid is from the in phase and side is from the
+quadrature signal. This can be used if there are Multiple transmitters that transmit at the same
+frequency. Or just for fun.
+
+ at item am_envelope
+Demodulate mono signal that is basically the energy of the spectrum.
+
+ at end table
+
+ at end table
+
@section tedcaptions
JSON captions used for @url{http://www.ted.com/, TED Talks}.
diff --git a/libavformat/Makefile b/libavformat/Makefile
index 05434a0f82..1efb51c613 100644
--- a/libavformat/Makefile
+++ b/libavformat/Makefile
@@ -528,6 +528,8 @@ OBJS-$(CONFIG_SCC_MUXER) += sccenc.o
OBJS-$(CONFIG_SCD_DEMUXER) += scd.o
OBJS-$(CONFIG_SDNS_DEMUXER) += sdns.o
OBJS-$(CONFIG_SDP_DEMUXER) += rtsp.o
+OBJS-$(CONFIG_SDR_DEMUXER) += sdrdemux.o
+OBJS-$(CONFIG_SDRFILE_DEMUXER) += sdrdemux.o
OBJS-$(CONFIG_SDR2_DEMUXER) += sdr2.o
OBJS-$(CONFIG_SDS_DEMUXER) += sdsdec.o
OBJS-$(CONFIG_SDX_DEMUXER) += sdxdec.o pcm.o
diff --git a/libavformat/allformats.c b/libavformat/allformats.c
index 96443a7272..a0393e6523 100644
--- a/libavformat/allformats.c
+++ b/libavformat/allformats.c
@@ -410,6 +410,8 @@ extern const FFOutputFormat ff_scc_muxer;
extern const AVInputFormat ff_scd_demuxer;
extern const AVInputFormat ff_sdns_demuxer;
extern const AVInputFormat ff_sdp_demuxer;
+extern const AVInputFormat ff_sdr_demuxer;
+extern const AVInputFormat ff_sdrfile_demuxer;
extern const AVInputFormat ff_sdr2_demuxer;
extern const AVInputFormat ff_sds_demuxer;
extern const AVInputFormat ff_sdx_demuxer;
diff --git a/libavformat/sdrdemux.c b/libavformat/sdrdemux.c
new file mode 100644
index 0000000000..28f6f3d706
--- /dev/null
+++ b/libavformat/sdrdemux.c
@@ -0,0 +1,1739 @@
+/*
+ * SDR Demuxer / Demodulator
+ * Copyright (c) 2023 Michael Niedermayer
+ *
+ * This file is part of FFmpeg.
+ *
+ * FFmpeg is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * FFmpeg is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with FFmpeg; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ *
+ */
+
+/**
+ * TODO
+ * * FM
+ * * DAB
+ * * DVB
+ * * Improve probing using multiple detections and differential detection
+ *
+ */
+
+#include "config_components.h"
+
+#include <pthread.h>
+#if CONFIG_SDR_DEMUXER
+#include <SoapySDR/Version.h>
+#include <SoapySDR/Device.h>
+#include <SoapySDR/Formats.h>
+#endif
+#include <stdatomic.h>
+#include <float.h>
+#include "libavutil/avassert.h"
+#include "libavutil/channel_layout.h"
+#include "libavutil/fifo.h"
+#include "libavutil/intreadwrite.h"
+#include "libavutil/opt.h"
+#include "libavutil/time.h"
+#include "libavutil/thread.h"
+#include "libavutil/tx.h"
+#include "libavcodec/kbdwin.h"
+#include "avformat.h"
+#include "demux.h"
+#include "internal.h"
+
+#ifdef SYN_TEST
+#include "libavutil/lfg.h"
+#endif
+
+#define FREQ_BITS 22
+#define TIMEBASE ((48000ll / 128) << FREQ_BITS)
+#define MAX_CHANNELS 4
+
+#define STATION_TIMEOUT 100 ///< The number of frames after which a station is removed if it was not detected
+
+/*
+ * 100 detects nothing
+ * 50 detects a good bit but not all
+ */
+#define AM_THRESHOLD 40
+
+#define AM_MAX23 0.03 //smaller causes failure on synthetic signals
+#define AM_MAX4 0.01
+
+#define FM_THRESHOLD .8 //TODO adjust
+
+#define INDEX2F(INDEX) (((INDEX) - sdr->block_size + 0.5) * 0.5 * sdr->sdr_sample_rate / sdr->block_size + sdr->block_center_freq)
+#define F2INDEX(F) ((( F) - sdr->block_center_freq) * 2 * sdr->block_size / sdr->sdr_sample_rate + sdr->block_size - 0.5)
+
+typedef enum Mode {
+ SingleStationMode, //< demodulate 1 stations for Radio like usage
+ AllStationMode, //< demodulate all stations in current input
+ ModeNB,
+} Mode;
+
+typedef enum AMMode {
+ AMMidSide,
+ AMLeftRight,
+ AMInPhase,
+ AMEnvelope,
+ AMModeNB,
+} AMMode;
+
+typedef enum Modulation {
+ AM,
+ FM,
+ OFDM_DQPSK, //DAB
+ //QAM, PSK, ...
+} Modulation;
+
+typedef struct Station {
+ char *name;
+ enum Modulation modulation;
+ double frequency;
+ int64_t bandwidth;
+ float score;
+ int timeout; //since how many blocks was this detectable but not detected
+ int multiplex_index; //DAB can have multiple stations on one frequency
+
+ struct SDRStream *stream;
+} Station;
+
+typedef struct SDRStream {
+ AVTXContext *ifft_ctx;
+ av_tx_fn ifft;
+ int block_size;
+ int processing_index;
+ float *out_buf;
+ AVComplexFloat *block;
+ AVComplexFloat *iblock;
+ AVComplexFloat *icarrier;
+ float *window;
+ Station *station;
+
+ int frame_size;
+ int frame_buffer_line;
+ uint8_t *frame_buffer;
+} SDRStream;
+
+typedef struct SDRContext {
+ const AVClass *class;
+ AVFormatContext *avfmt;
+#if CONFIG_SDR_DEMUXER
+ SoapySDRDevice *soapy;
+ SoapySDRStream *soapyRxStream;
+#endif
+ AVTXContext *fft_ctx;
+ av_tx_fn fft;
+ Mode mode;
+ AVRational fps;
+ char *driver_name;
+ char *dump_url;
+ int fileheader_size;
+ AVIOContext *dump_avio;
+ Station **station;
+ int nb_stations;
+ int width, height;
+ int single_ch_audio_st_index;
+ int64_t freq;
+ int64_t min_freq;
+ int64_t max_freq;
+ int64_t min_center_freq;
+ int64_t max_center_freq;
+ int sdr_sample_rate;
+ int sdr_agc;
+ int64_t bandwidth;
+ int64_t last_pts;
+ int64_t pts;
+ int block_size;
+ int kbd_alpha;
+ AVComplexFloat *windowed_block;
+ int64_t block_center_freq; ///< center frequency the current block contains
+ int64_t station_freq;
+
+ int am_mode; ///< AMMode but using int for generic option access
+
+ pthread_t soapy_thread;
+ int thread_started;
+ pthread_mutex_t mutex; ///< Mutex to protect common variable between mainthread and soapy_thread, and also to protect soapy from concurrent calls
+ AVFifo *empty_block_fifo;
+ AVFifo *full_block_fifo;
+ atomic_int close_requested;
+ int64_t wanted_freq; ///< center frequency we want the hw to provide next
+ int seek_direction; ///< if a seek is requested this is -1 or 1 otherwise 0
+ int skip_probe;
+
+ AVComplexFloat *block;
+ float *len2block;
+ float *window;
+
+ int missing_streams;
+} SDRContext;
+
+typedef struct ModulationDescriptor {
+ const char *name;
+ enum Modulation modulation;
+ enum AVMediaType media_type;
+
+ /**
+ * Scan all of the current sdr->block and call create_station() for each found station
+ */
+ int (*probe)(SDRContext *sdr);
+
+ /**
+ * Demodulate given station into packet
+ */
+ int (*demodulate)(SDRContext *sdr, int stream_index, AVPacket *pkt);
+} ModulationDescriptor;
+
+typedef struct FIFOElement {
+ int64_t center_frequency;
+ AVComplexFloat *halfblock;
+} FIFOElement;
+
+static float len2(AVComplexFloat c)
+{
+ return c.re*c.re + c.im*c.im;
+}
+
+static int create_station(SDRContext *sdr, enum Modulation modulation, double freq, int64_t bandwidth, float score) {
+ Station *station;
+ void *tmp;
+ int i;
+ double best_distance = INT64_MAX;
+ Station *best_station = NULL;
+ int best_station_index = -1;
+ float drift = modulation == AM ? sdr->sdr_sample_rate / (float)sdr->block_size + 1 : (bandwidth/4.0);
+
+ for (i=0; i<sdr->nb_stations; i++) {
+ double delta = fabs(sdr->station[i]->frequency - freq);
+ // Station already added, or we have 2 rather close stations
+ //FIXME we want to make sure that the stronger station is not skiped but we also dont want to add a station twice
+ if (modulation == sdr->station[i]->modulation && delta < best_distance) {
+ best_distance = delta;
+ best_station = sdr->station[i];
+ best_station_index = i;
+ }
+ }
+ if (best_station) {
+ if (best_distance <= drift)
+ return best_station_index;
+ }
+
+ tmp = av_realloc_array(sdr->station, sdr->nb_stations+1, sizeof(*sdr->station));
+ if (!tmp)
+ return AVERROR(ENOMEM);
+ sdr->station = tmp;
+
+ station = av_mallocz(sizeof(*station));
+ if (!station)
+ return AVERROR(ENOMEM);
+
+ sdr->station[sdr->nb_stations++] = station;
+
+ station->modulation = modulation;
+ station->frequency = freq;
+ station->bandwidth = bandwidth;
+ station->score = score;
+
+ // if we just found a new station lets also probe the next frame
+ sdr->skip_probe = 0;
+
+ av_log(sdr, AV_LOG_INFO, "create_station %d f:%f bw:%"PRId64" score: %f\n", modulation, freq, bandwidth, score);
+
+ return sdr->nb_stations - 1;
+}
+
+static void free_station(Station *station)
+{
+ av_freep(&station->name);
+ if (station->stream)
+ station->stream->station = NULL;
+ av_free(station);
+}
+
+/**
+ * remove stations which we no longer receive well
+ * Especially with AM and weather conditions stations disapear, this keeps things a bit more tidy
+ */
+static void decay_stations(SDRContext *sdr)
+{
+ for (int i=0; i<sdr->nb_stations; i++) {
+ Station *station = sdr->station[i];
+
+ if (station->frequency - station->bandwidth/2 < sdr->block_center_freq - sdr->bandwidth/2 ||
+ station->frequency + station->bandwidth/2 > sdr->block_center_freq + sdr->bandwidth/2)
+ continue;
+ if (station->stream)
+ continue;
+
+ if (station->timeout++ > STATION_TIMEOUT) {
+ free_station(station);
+ sdr->station[i] = sdr->station[--sdr->nb_stations];
+ }
+ }
+}
+
+static void probe_common(SDRContext *sdr)
+{
+ for(int i = 0; i < 2*sdr->block_size; i++) {
+ sdr->len2block[i] = len2(sdr->block[i]);
+ }
+}
+
+// simple and dumb implementation for max we could do it faster but it doesnzt matter ATM
+static float max_in_range(SDRContext *sdr, unsigned start, unsigned end)
+{
+ float max = sdr->len2block[start];
+ for (; start <= end; start++)
+ max = fmax(max, sdr->len2block[start]);
+ return max;
+}
+
+static double find_peak(SDRContext *sdr, const float *data, int index, int len)
+{
+ double y[3], b, a;
+
+ if (index == 0) {
+ index = 1;
+ } else if (index >= len - 1)
+ index = len - 2;
+
+ //We use a simple quadratic to find the maximum at higher precission than the available samples
+ //ax^2 + bx + c
+ //dy/dx = 2ax + b = 0
+ y[0] = data[index-1];
+ y[1] = data[index];
+ y[2] = data[index+1];
+
+ b = (y[2] - y[0]) * 0.5;
+ a = (y[0] + y[2]) * 0.5 - y[1];
+
+ //This should not happen
+ if (a >= 0.0)
+ return INT_MIN;
+
+ return index -0.5 * b / a;
+ //TODO theres some simplification possible above but the fm_probe() using this needs to be tuned first so we dont optimize the wrong algorithm
+}
+
+static double find_peak_macleod(SDRContext *sdr, const AVComplexFloat *data, int index, int len, float *phase) {
+ AVComplexFloat ref;
+ double r0, r1, r2, rd, g;
+ double ab[16][2] = {
+ {1.525084, 3.376388}, {1.773260, 3.129280}, {1.970200, 2.952300}, {2.122700, 2.825800},
+ {2.243600, 2.731620}, {2.341880, 2.658740}, {2.423310, 2.600750}, {2.492110, 2.553360},
+ {2.551000, 2.513930}, {2.602300, 2.480400}, {2.646880, 2.451880}, {2.686200, 2.427200},
+ {2.721880, 2.405120}, {2.753600, 2.385800}, {2.781800, 2.368900}, {2.808580, 2.352920},
+ };
+
+ double a = ab[sdr->kbd_alpha-1][0];
+ double b = ab[sdr->kbd_alpha-1][1];
+
+ if (index == 0) {
+ index = 1;
+ } else if (index >= len - 1)
+ index = len - 2;
+
+ /* Baed on Macleod, M.D., "Fast Nearly ML Estimation of the Parameters
+ * of Real or Complex Single Tones or Resolved Multiple Tones,"
+ * IEEE Trans. Sig. Proc. Vol 46 No 1,
+ * January 1998, pp141-148.
+ *
+ * We use the 3 point estimator without corrections, the corrections
+ * provide insignificant performance increase. We add compensation due to
+ * the window used, this performs substantially better than the original
+ * with a rectangular window.
+ */
+ ref = data[index];
+ r0 = data[index-1].re * ref.re + data[index-1].im * ref.im;
+ r1 = ref.re * ref.re + ref.im * ref.im;
+ r2 = data[index+1].re * ref.re + data[index+1].im * ref.im;
+ rd = 2*r1 + r0 + r2;
+ if (r2 > r1 || r0 > r1 || rd <=0) // rounding and float numeric issues
+ return -1;
+ g = (r0-r2) / rd + DBL_MIN;
+ g = (sqrt(a*a + 8*g*g)-a)/(b*g);
+
+ if (phase) {
+ AVComplexFloat t;
+ if (g < 0){
+ t.re = ref.re * (1+g) + data[index-1].re * g;
+ t.im = ref.im * (1+g) + data[index-1].im * g;
+ } else {
+ t.re = ref.re * (1-g) - data[index+1].re * g;
+ t.im = ref.im * (1-g) - data[index+1].im * g;
+ }
+ *phase = atan2(t.im, t.re) - M_PI*g;
+ }
+
+ return index + g;
+}
+
+static int probe_am(SDRContext *sdr)
+{
+ int i;
+ int bandwidth_f = 6000;
+ int half_bw_i = bandwidth_f * (int64_t)sdr->block_size / sdr->sdr_sample_rate;
+ double avg = 0;
+
+ if (2*half_bw_i > 2*sdr->block_size)
+ return 0;
+
+ for (i = 0; i<2*half_bw_i; i++)
+ avg += sdr->len2block[i];
+
+ for (i = half_bw_i; i<2*sdr->block_size - half_bw_i; i++) {
+ float mid = sdr->len2block[i];
+ double score;
+ avg += sdr->len2block[i + half_bw_i];
+ score = half_bw_i * mid / (avg - mid);
+ avg -= sdr->len2block[i - half_bw_i];
+ //TODO also check for symmetry in the spectrum
+ if (mid > 0 && score > AM_THRESHOLD &&
+ sdr->len2block[i - 1] < mid && sdr->len2block[i + 1] <= mid &&
+ sdr->len2block[i - 2] < mid*AM_MAX23 && sdr->len2block[i + 2] < mid*AM_MAX23 &&
+ sdr->len2block[i - 3] < mid*AM_MAX23 && sdr->len2block[i + 3] < mid*AM_MAX23
+ ){
+ if (max_in_range(sdr, i-half_bw_i, i-4) < mid*AM_MAX4 &&
+ max_in_range(sdr, i+4, i+half_bw_i) < mid*AM_MAX4) {
+ int station_index;
+ double peak_i = find_peak_macleod(sdr, sdr->block, i, 2*sdr->block_size, NULL);
+ if (peak_i < 0)
+ continue;
+ if (fabs(peak_i-i) > 1.0) {
+ av_log(sdr->avfmt, AV_LOG_WARNING, "peak detection failure\n");
+ continue;
+ }
+
+ station_index = create_station(sdr, AM, INDEX2F(peak_i), bandwidth_f, score);
+
+ if (station_index >= 0) {
+ Station *station = sdr->station[station_index];
+ station->timeout = 0;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int demodulate_am(SDRContext *sdr, int stream_index, AVPacket *pkt)
+{
+ AVStream *st = sdr->avfmt->streams[stream_index];
+ SDRStream *sst = st->priv_data;
+ double freq = sst->station->frequency;
+ int64_t bandwidth = sst->station->bandwidth;
+ int index = lrint(F2INDEX(freq));
+ int len = (bandwidth * 2ll * sdr->block_size + sdr->sdr_sample_rate/2) / sdr->sdr_sample_rate;
+ float *newbuf;
+ float scale;
+ int sample_rate = sdr->sdr_sample_rate * (int64_t)sst->block_size / sdr->block_size;
+ int ret, i;
+ int i_max;
+ double current_station_i;
+ double avg = 0;
+ float score;
+ float mid=0;
+ float limits[2] = {-0.0, 0.0};
+ float clip = 1.0;
+ enum AMMode am_mode = sdr->am_mode;
+
+#define CARRIER_SEARCH 2
+ if (index + len + CARRIER_SEARCH>= 2*sdr->block_size ||
+ index - len - CARRIER_SEARCH < 0 ||
+ 2*len + 1 > 2*sst->block_size)
+ return AVERROR(ERANGE);
+
+ for(int i = index-CARRIER_SEARCH; i<index+CARRIER_SEARCH; i++) {
+ sdr->len2block[i] = len2(sdr->block[i]); // we only update the array when probing so we need to compute this here
+ if (sdr->len2block[i] > sdr->len2block[i_max])
+ i_max = i;
+ }
+ mid = sdr->len2block[i_max];
+
+ for (i = -len; i < len+1; i++)
+ avg += sdr->len2block[i + index];
+ score = len * mid / (avg - mid);
+ //find optimal frequency for this block if we have a carrier
+ if (score > AM_THRESHOLD / 4) {
+ i_max = index;
+
+ current_station_i = find_peak_macleod(sdr, sdr->block, i_max, 2*sdr->block_size, NULL);
+ if (current_station_i >= 0 && fabs(current_station_i - i_max) < 1.0) {
+ av_log(sdr->avfmt, AV_LOG_DEBUG, "adjusting frequency %f, max index: %ld\n", INDEX2F(current_station_i) - freq, lrint(F2INDEX(freq)) - index);
+ freq = INDEX2F(current_station_i);
+ index = lrint(F2INDEX(freq));
+ }
+ } else {
+ // We have no carrier so we cannot decode Synchronously to a carrier
+ am_mode = AMEnvelope;
+ }
+
+ newbuf = av_malloc(sizeof(*sst->out_buf) * 2 * sst->block_size);
+ if (!newbuf)
+ return AVERROR(ENOMEM);
+#define SEPC 4
+
+ i = 2*len+1;
+ memcpy(sst->block, sdr->block + index - len, sizeof(*sst->block) * i);
+ memset(sst->block + i, 0, sizeof(*sst->block) * (2 * sst->block_size - i));
+
+ sst->ifft(sst->ifft_ctx, sst->iblock , sst->block, sizeof(AVComplexFloat));
+
+ if (am_mode == AMEnvelope) {
+ double vdotw = 0;
+ double wdot = 0; // could be precalculated
+ for (i = 0; i<2*sst->block_size; i++) {
+ float w = sst->window[i];
+ float v = sqrt(len2(sst->iblock[i]));
+ sst->iblock[i].re = v;
+ sst->iblock[i].im = 0;
+
+ vdotw += w*v;
+ wdot += w*w;
+ }
+
+ vdotw /= wdot ;
+ for (i = 0; i<2*sst->block_size; i++) {
+ float w = sst->window[i];
+ sst->iblock[i].re -= w*vdotw;
+ }
+
+ scale = 0.9/vdotw;
+ } else {
+ // Synchronous demodulation
+ memset(sst->block, 0, sizeof(*sst->block) * i);
+ for (i = len-SEPC+1; i<len+SEPC; i++)
+ sst->block[i] = sdr->block[index + i - len];
+ sst->ifft(sst->ifft_ctx, sst->icarrier, sst->block, sizeof(AVComplexFloat));
+
+ for (i = 0; i<2*sst->block_size; i++) {
+ AVComplexFloat c = sst->icarrier[i];
+ AVComplexFloat s = sst->iblock[i];
+ float w = sst->window[i];
+ float den = w / (c.re*c.re + c.im*c.im);
+ av_assert0(c.re*c.re + c.im*c.im > 0);
+
+ sst->iblock[i].re = (s.im*c.im + s.re*c.re) * den;
+ sst->iblock[i].im = (s.im*c.re - s.re*c.im) * den;
+ sst->iblock[i].re -= w;
+ }
+ scale = 0.9;
+ }
+
+ for(int i = 0; i<2*sst->block_size; i++) {
+ av_assert0(isfinite(sst->iblock[i].re));
+ av_assert0(isfinite(sst->iblock[i].im));
+ limits[0] = FFMIN(limits[0], FFMIN(sst->iblock[i].re - sst->iblock[i].im, sst->iblock[i].re + sst->iblock[i].im));
+ limits[1] = FFMAX(limits[1], FFMAX(sst->iblock[i].re - sst->iblock[i].im, sst->iblock[i].re + sst->iblock[i].im));
+ }
+ av_assert1(FFMAX(limits[1], -limits[0]) >= 0);
+ scale = FFMIN(scale, 0.98 / FFMAX(limits[1], -limits[0]));
+
+ for(i = 0; i<sst->block_size; i++) {
+ float m, q;
+
+ m = sst->out_buf[2*i+0] + (sst->iblock[i ].re) * sst->window[i ] * scale;
+ newbuf[2*i+0] = (sst->iblock[i + sst->block_size].re) * sst->window[i + sst->block_size] * scale;
+
+ switch(am_mode) {
+ case AMMidSide:
+ case AMLeftRight:
+ q = sst->out_buf[2*i+1] + sst->iblock[i ].im * sst->window[i ] * scale;
+ newbuf[2*i+1] = sst->iblock[i + sst->block_size].im * sst->window[i + sst->block_size] * scale;
+ switch(am_mode) {
+ case AMMidSide:
+ q *= 0.5;
+ sst->out_buf[2*i+0] = m + q;
+ sst->out_buf[2*i+1] = m - q;
+ break;
+ case AMLeftRight:
+ sst->out_buf[2*i+0] = m;
+ sst->out_buf[2*i+1] = q;
+ break;
+ }
+ break;
+
+ case AMEnvelope:
+ case AMInPhase:
+ sst->out_buf[2*i+0] =
+ sst->out_buf[2*i+1] = m;
+ break;
+ }
+
+ if (fabs(sst->out_buf[i]) > clip) {
+ av_log(sdr->avfmt, AV_LOG_WARNING, "CLIP %f\n", sst->out_buf[i]);
+ clip = fabs(sst->out_buf[i]) * 1.1;
+ }
+ }
+
+ ret = av_packet_from_data(pkt, (void*)sst->out_buf, sizeof(*sst->out_buf) * 2 * sst->block_size);
+ if (ret < 0)
+ av_free(sst->out_buf);
+ sst->out_buf = newbuf;
+
+ if (st->codecpar->ch_layout.nb_channels != 2 ||
+ st->codecpar->sample_rate != sample_rate
+ ) {
+ av_log(sdr->avfmt, AV_LOG_INFO, "set channel parameters %d %d %d\n", st->codecpar->ch_layout.nb_channels, st->codecpar->sample_rate, sample_rate);
+ if (st->codecpar->sample_rate == 0)
+ sdr->missing_streams--;
+ ff_add_param_change(pkt, 2, 0, sample_rate, 0, 0);
+ st->codecpar->sample_rate = sample_rate;
+ }
+
+ return ret;
+}
+
+static int probe_fm(SDRContext *sdr)
+{
+ int i;
+ int bandwidth_f = 200*1000;
+ int half_bw_i = bandwidth_f * (int64_t)sdr->block_size / sdr->sdr_sample_rate;
+ double avg[2] = {0}, tri = 0;
+ float last_score[3] = {FLT_MAX, FLT_MAX, FLT_MAX};
+
+ if (2*half_bw_i > 2*sdr->block_size)
+ return 0;
+
+ for (i = 0; i<half_bw_i; i++) {
+ avg[0] += sdr->len2block[i];
+ tri += i*sdr->len2block[i];
+ }
+ for (; i<2*half_bw_i; i++) {
+ avg[1] += sdr->len2block[i];
+ tri += (2*half_bw_i-i)*sdr->len2block[i];
+ }
+
+ for(i = half_bw_i; i<2*sdr->block_size - half_bw_i; i++) {
+ double b = avg[0] + sdr->len2block[i];
+ avg[0] += sdr->len2block[i] - sdr->len2block[i - half_bw_i];
+ avg[1] -= sdr->len2block[i] - sdr->len2block[i + half_bw_i];
+ b += avg[1];
+ tri += avg[1] - avg[0];
+
+ last_score[2] = last_score[1];
+ last_score[1] = last_score[0];
+ last_score[0] = tri / (b * half_bw_i);
+
+ if (last_score[1] >= last_score[0] &&
+ last_score[1] > last_score[2] &&
+ last_score[1] > FM_THRESHOLD) {
+
+ // as secondary check, we could check that without the center 3 samples we are still having a strong signal FIXME
+
+ double peak_i = find_peak(sdr, last_score, 1, 3) + i - 1;
+ if (peak_i < 0)
+ continue;
+ av_assert0(fabs(peak_i-i) < 2);
+//Disabled as we dont have demodulate yet and its wrong sometimes
+// create_station(sdr, FM, peak_i * 0.5 * sdr->sdr_sample_rate / sdr->block_size + sdr->block_center_freq - sdr->sdr_sample_rate/2, bandwidth_f, last_score[1]);
+
+ }
+ }
+
+ return 0;
+}
+
+ModulationDescriptor modulation_descs[] = {
+ {"Amplitude Modulation", AM, AVMEDIA_TYPE_AUDIO, probe_am, demodulate_am},
+ {"Frequency Modulation", FM, AVMEDIA_TYPE_AUDIO, probe_fm, NULL},
+};
+
+static int set_sdr_freq(SDRContext *sdr, int64_t freq)
+{
+ freq = av_clip64(freq, sdr->min_center_freq, sdr->max_center_freq);
+
+#if CONFIG_SDR_DEMUXER
+ if (sdr->soapy && SoapySDRDevice_setFrequency(sdr->soapy, SOAPY_SDR_RX, 0, freq, NULL) != 0) {
+ av_log(sdr->avfmt, AV_LOG_ERROR, "setFrequency fail: %s\n", SoapySDRDevice_lastError());
+ return AVERROR_EXTERNAL;
+ }
+#endif // CONFIG_SDR_DEMUXER
+
+ sdr->freq = freq;
+
+ return 0;
+}
+
+static void free_stream(SDRContext *sdr, int stream_index)
+{
+ AVFormatContext *s = sdr->avfmt;
+ AVStream *st = s->streams[stream_index];
+ SDRStream *sst = st->priv_data;
+
+ av_tx_uninit(&sst->ifft_ctx);
+ sst->ifft = NULL;
+ sst->block_size = 0;
+
+ av_freep(&sst->out_buf);
+ av_freep(&sst->block);
+ av_freep(&sst->iblock);
+ av_freep(&sst->icarrier);
+ av_freep(&sst->window);
+
+}
+
+static int setup_stream(SDRContext *sdr, int stream_index, Station *station)
+{
+ AVFormatContext *s = sdr->avfmt;
+ AVStream *st = s->streams[stream_index];
+ SDRStream *sst = st->priv_data;
+ int ret;
+
+ //For now we expect each station to be only demodulated once, nothing should break though if its done more often
+ av_assert0(station->stream == NULL || station->stream == sst);
+
+ if (sst->station)
+ sst->station->stream = NULL;
+
+ sst->station = station;
+ station->stream = sst;
+
+ if (st->codecpar->codec_type == AVMEDIA_TYPE_AUDIO) {
+ free_stream(sdr, stream_index);
+
+ for (sst->block_size = 4; 4ll *sst->station->bandwidth * sdr->block_size / sdr->sdr_sample_rate > sst->block_size; sst->block_size <<= 1)
+ ;
+ sst->block_size = FFMIN(sdr->block_size, sst->block_size);
+
+ ret = av_tx_init(&sst->ifft_ctx, &sst->ifft, AV_TX_FLOAT_FFT, 1, 2*sst->block_size, NULL, 0);
+ if (ret < 0)
+ return ret;
+
+ sst->out_buf = av_malloc(sizeof(*sst->out_buf) * 2 * sst->block_size);
+ sst->block = av_malloc(sizeof(*sst-> block) * 2 * sst->block_size);
+ sst->iblock = av_malloc(sizeof(*sst->iblock) * 2 * sst->block_size);
+ sst->icarrier = av_malloc(sizeof(*sst->icarrier) * 2 * sst->block_size);
+ sst->window = av_malloc(sizeof(*sst->window) * 2 * sst->block_size);
+ if (!sst->out_buf || !sst->block || !sst->iblock || !sst->icarrier || !sst->window)
+ return AVERROR(ENOMEM);
+
+ avpriv_kbd_window_init(sst->window, 8, sst->block_size);
+ for(int i = sst->block_size; i < 2 * sst->block_size; i++) {
+ sst->window[i] = sst->window[2*sst->block_size - i - 1];
+ }
+ }
+
+ return 0;
+}
+
+static void inject_block_into_fifo(SDRContext *sdr, AVFifo *fifo, FIFOElement *fifo_element, const char *error_message)
+{
+ int ret;
+
+ pthread_mutex_lock(&sdr->mutex);
+ ret = av_fifo_write(fifo, fifo_element, 1);
+ pthread_mutex_unlock(&sdr->mutex);
+ if (ret < 0) {
+ av_log(sdr->avfmt, AV_LOG_DEBUG, "%s", error_message);
+ av_freep(&fifo_element->halfblock);
+ }
+}
+
+static void flush_fifo(SDRContext *sdr, AVFifo *fifo)
+{
+ FIFOElement fifo_element;
+
+ pthread_mutex_lock(&sdr->mutex);
+ while(fifo) {
+ int ret = av_fifo_read(fifo, &fifo_element, 1);
+ if (ret < 0)
+ break;
+ av_freep(&fifo_element.halfblock);
+ }
+ pthread_mutex_unlock(&sdr->mutex);
+}
+
+/**
+ * Grab data from soapy and put it in a bigger buffer.
+ * This thread would not be needed if libsoapy internal buffering was not restricted
+ * to a few milli seconds. libavformat cannot guarntee that it will get called from the user
+ * application every 10-20ms or something like that so we need a thread to pull data from soapy
+ * and put it in a larger buffer that we can then read from at the rate the code is called
+ * by the user
+ */
+static void *soapy_needs_bigger_buffers_worker(SDRContext *sdr)
+{
+ AVFormatContext *avfmt = sdr->avfmt;
+ unsigned block_counter = 0;
+ int remaining_file_block_size = 0;
+ ff_thread_setname("sdrdemux - soapy rx");
+
+ while(!atomic_load(&sdr->close_requested)) {
+ FIFOElement fifo_element;
+ int remaining, ret;
+ int empty_blocks, full_blocks;
+
+ //i wish av_fifo was thread safe
+ pthread_mutex_lock(&sdr->mutex);
+ ret = av_fifo_read(sdr->empty_block_fifo, &fifo_element, 1);
+ empty_blocks = av_fifo_can_read(sdr->empty_block_fifo);
+ full_blocks = av_fifo_can_read(sdr->full_block_fifo);
+ pthread_mutex_unlock(&sdr->mutex);
+
+ if (ret < 0) {
+ av_log(avfmt, AV_LOG_WARNING, "Allocating new block due to lack of space full:%d empty:%d\n", full_blocks, empty_blocks);
+ fifo_element.halfblock = av_malloc(sdr->block_size * sizeof(fifo_element.halfblock));
+ if (!fifo_element.halfblock) {
+ av_log(avfmt, AV_LOG_ERROR, "Allocation failed, waiting for free space\n");
+ // we wait 10ms here, tests have shown soapy to loose data when it is not serviced for 40-50ms
+ av_usleep(10*1000);
+ continue;
+ }
+ }
+
+ block_counter ++;
+ pthread_mutex_lock(&sdr->mutex);
+ // we try to get 2 clean blocks after windowing, to improve chances scanning doesnt miss too much
+ // First block after parameter change is not reliable, we do not assign it any frequency
+ // 2 blocks are needed with windowing to get a clean FFT output
+ // Thus > 3 is the minimum for the next frequency update if we want to do something reliable with the data
+ if (sdr->seek_direction && block_counter > 3) {
+ int64_t new_freq = av_clip64(sdr->wanted_freq + sdr->seek_direction*sdr->bandwidth, sdr->min_center_freq, sdr->max_center_freq);
+
+ // did we hit an end ?
+ if (new_freq == sdr->wanted_freq) {
+ //simply wrap around
+ new_freq = new_freq == sdr->min_center_freq ? sdr->max_center_freq : sdr->min_center_freq;
+ }
+ sdr->wanted_freq = new_freq;
+ }
+ if (sdr->wanted_freq != sdr->freq) {
+ //We could use a seperate MUTEX for the FIFO and for soapy
+ set_sdr_freq(sdr, sdr->wanted_freq);
+ //This shouldnt really cause any problem if we just continue on error except that we continue returning data with the previous target frequency range
+ //And theres not much else we can do, an error message was already printed by set_sdr_freq() in that case
+ block_counter = 0; // we just changed the frequency, do not trust the next blocks content
+ }
+ pthread_mutex_unlock(&sdr->mutex);
+
+ fifo_element.center_frequency = block_counter > 0 ? sdr->freq : 0;
+
+ remaining = sdr->block_size;
+ while (remaining && !atomic_load(&sdr->close_requested)) {
+ void *soapy_buffers[MAX_CHANNELS] = {NULL};
+ long long soapy_ts;
+ int soapy_flags;
+
+ soapy_buffers[0] = fifo_element.halfblock + sdr->block_size - remaining;
+#if CONFIG_SDR_DEMUXER
+ if (sdr->soapy) {
+ ret = SoapySDRDevice_readStream(sdr->soapy, sdr->soapyRxStream,
+ soapy_buffers,
+ remaining,
+ &soapy_flags,
+ &soapy_ts,
+ 10*1000);
+
+ if (ret == SOAPY_SDR_TIMEOUT) {
+ continue;
+ } else if (ret == SOAPY_SDR_OVERFLOW) {
+ av_log(avfmt, AV_LOG_WARNING, "SOAPY OVERFLOW\n");
+ continue;
+ } else if (ret < 0) {
+ av_log(avfmt, AV_LOG_ERROR, "SoapySDRDevice_readStream() Failed with (%d) %s\n", ret, SoapySDRDevice_lastError());
+ av_usleep(10*1000);
+ continue;
+ }
+ } else
+#endif // CONFIG_SDR_DEMUXER
+ {
+ float scale = 1 / 32768.0;
+ int64_t size;
+ float *outp;
+ uint8_t *inp;
+ if (!remaining_file_block_size) {
+ int block_size;
+ avio_skip(avfmt->pb, 16 + 4); //FFSDR00Xint16BE
+ block_size = avio_rb32(avfmt->pb);
+ fifo_element.center_frequency = av_int2double(avio_rb64(avfmt->pb));
+ avio_rb64(avfmt->pb); //pts
+ avio_skip(avfmt->pb, sdr->fileheader_size - 40);
+ remaining_file_block_size = block_size;
+ }
+ pthread_mutex_lock(&sdr->mutex);
+
+ //We have no FIFO API to check how much we can write
+ size = sdr->sdr_sample_rate / sdr->block_size - av_fifo_can_read(sdr->full_block_fifo);
+ pthread_mutex_unlock(&sdr->mutex);
+ if (size <= 0) {
+ av_usleep(10*1000);
+ continue;
+ }
+ size = FFMIN(remaining, remaining_file_block_size) * sizeof(int16_t) * 2;
+ outp = soapy_buffers[0];
+ inp = (uint8_t*)soapy_buffers[0] + size; // used as temporary buffer
+ ret = avio_read(avfmt->pb, inp, size);
+ if (ret == AVERROR_EOF || (ret > 0 && ret % (sizeof(int16_t) * 2))) {
+ avio_seek(avfmt->pb, SEEK_SET, 0);
+ av_log(avfmt, AV_LOG_INFO, "EOF, will wraparound\n");
+ continue;
+ } else if (ret == AVERROR(EAGAIN)) {
+ av_log(avfmt, AV_LOG_DEBUG, "read EAGAIN\n");
+ continue;
+ } else if (ret < 0) {
+ av_log(avfmt, AV_LOG_ERROR, "read Failed with (%d)\n", ret);
+ continue;
+ }
+
+ ret /= sizeof(int16_t) * 2;
+ for(int i= 0; i<ret; i++) {
+ outp[2*i + 0] = (int16_t)AV_RB16(inp + 4*i + 0) * scale;
+ outp[2*i + 1] = (int16_t)AV_RB16(inp + 4*i + 2) * scale;
+ }
+ remaining_file_block_size -= ret;
+ }
+ av_assert0(ret <= remaining);
+ remaining -= ret;
+ }
+
+ inject_block_into_fifo(sdr, sdr->full_block_fifo, &fifo_element, "block fifo overflow, discarding block\n");
+ }
+ av_assert0(atomic_load(&sdr->close_requested) == 1);
+
+ return NULL;
+}
+
+static int sdr_read_header(AVFormatContext *s)
+{
+ SDRContext *sdr = s->priv_data;
+ AVStream *st;
+ SDRStream *sst;
+ int ret, i;
+
+ size_t length;
+ char** names;
+ int64_t max_sample_rate;
+
+ sdr->avfmt = s;
+
+ if (sdr->width>1 && sdr->height>1) {
+ /* video stream */
+ st = avformat_new_stream(s, NULL);
+ if (!st)
+ return AVERROR(ENOMEM);
+ sst = av_mallocz(sizeof(SDRStream));
+ if (!sst)
+ return AVERROR(ENOMEM);
+ st->priv_data = sst;
+ st->codecpar->codec_type = AVMEDIA_TYPE_VIDEO;
+ st->codecpar->codec_id = AV_CODEC_ID_RAWVIDEO;
+ st->codecpar->codec_tag = 0; /* no fourcc */
+ st->codecpar->format = AV_PIX_FMT_BGRA;
+ st->codecpar->width = sdr->width;
+ st->codecpar->height = sdr->height;
+ avpriv_set_pts_info(st, 64, 1, (48000/128) << FREQ_BITS);
+ }
+
+ if (sdr->mode == SingleStationMode) {
+ /* audio stream */
+ st = avformat_new_stream(s, NULL);
+ if (!st)
+ return AVERROR(ENOMEM);
+ sst = av_mallocz(sizeof(SDRStream));
+ if (!sst)
+ return AVERROR(ENOMEM);
+ st->priv_data = sst;
+ st->codecpar->codec_type = AVMEDIA_TYPE_AUDIO;
+ st->codecpar->codec_tag = 0; /* no fourcc */
+ st->codecpar->codec_id = HAVE_BIGENDIAN ? AV_CODEC_ID_PCM_F32BE : AV_CODEC_ID_PCM_F32LE;
+ st->codecpar->ch_layout = (AVChannelLayout)AV_CHANNEL_LAYOUT_STEREO;
+ st->codecpar->sample_rate = 0; //will be set later
+ avpriv_set_pts_info(st, 64, 1, (48000/128) << FREQ_BITS);
+ sdr->single_ch_audio_st_index = st->index;
+ sdr->missing_streams++;
+ }
+
+#if CONFIG_SDR_DEMUXER
+ if (!strcmp(s->iformat->name, "sdr")) {
+ SoapySDRRange *ranges, range;
+ SoapySDRKwargs *results = SoapySDRDevice_enumerate(NULL, &length);
+ SoapySDRKwargs args = {};
+ int has_agc;
+
+ for (i = 0; i < length; i++) {
+ int usable = 1;
+ for (int j = 0; j < results[i].size; j++) {
+ if (!strcmp("driver", results[i].keys[j])) {
+ if (!strcmp("audio", results[i].vals[j])) {
+ usable = 0;
+ } else if (!sdr->driver_name) {
+ sdr->driver_name = av_strdup(results[i].vals[j]);
+ if (!sdr->driver_name)
+ return AVERROR(ENOMEM);
+ }
+ }
+ }
+ if (!usable)
+ continue;
+ av_log(s, AV_LOG_INFO, "Soapy enumeration %d\n", i);
+ for (int j = 0; j < results[i].size; j++) {
+ av_log(s, AV_LOG_INFO, " results %s = %s\n", results[i].keys[j], results[i].vals[j]);
+ }
+ }
+ SoapySDRKwargsList_clear(results, length);
+
+ av_log(s, AV_LOG_INFO, "Opening %s\n", sdr->driver_name);
+ if (!sdr->driver_name)
+ return AVERROR(EINVAL); //No driver specified and none found
+ SoapySDRKwargs_set(&args, "driver", sdr->driver_name);
+ sdr->soapy = SoapySDRDevice_make(&args);
+ SoapySDRKwargs_clear(&args);
+
+ if (sdr->soapy == NULL) {
+ av_log(s, AV_LOG_ERROR, "SoapySDRDevice_make fail: %s\n", SoapySDRDevice_lastError());
+ return AVERROR_EXTERNAL;
+ }
+
+ names = SoapySDRDevice_listAntennas(sdr->soapy, SOAPY_SDR_RX, 0, &length);
+ av_log(s, AV_LOG_INFO, "Antennas: ");
+ for (i = 0; i < length; i++)
+ av_log(s, AV_LOG_INFO, "%s, ", names[i]);
+ av_log(s, AV_LOG_INFO, "\n");
+ SoapySDRStrings_clear(&names, length);
+
+ names = SoapySDRDevice_listGains(sdr->soapy, SOAPY_SDR_RX, 0, &length);
+ av_log(s, AV_LOG_INFO, "Rx Gain Elements: ");
+ for (i = 0; i < length; i++)
+ av_log(s, AV_LOG_INFO, "%s, ", names[i]);
+ av_log(s, AV_LOG_INFO, "\n");
+ SoapySDRStrings_clear(&names, length);
+
+ has_agc = SoapySDRDevice_hasGainMode(sdr->soapy, SOAPY_SDR_RX, 0);
+ av_log(s, AV_LOG_INFO, "RX AGC Supported: %d\n", has_agc);
+ if (has_agc)
+ SoapySDRDevice_setGainMode(sdr->soapy, SOAPY_SDR_RX, 0, 1);
+
+ range = SoapySDRDevice_getGainRange(sdr->soapy, SOAPY_SDR_RX, 0);
+ av_log(s, AV_LOG_INFO, "Rx Gain range: %f dB - %f dB\n", range.minimum, range.maximum);
+
+ ranges = SoapySDRDevice_getFrequencyRange(sdr->soapy, SOAPY_SDR_RX, 0, &length);
+ av_log(s, AV_LOG_INFO, "Rx freq ranges: ");
+ for (i = 0; i < length; i++) {
+ av_log(s, AV_LOG_INFO, "[%g Hz -> %g Hz], ", ranges[i].minimum, ranges[i].maximum);
+ if (sdr->max_freq > ranges[i].maximum)
+ continue;
+ if (sdr->min_freq && sdr->min_freq < ranges[i].minimum)
+ continue;
+ break;
+ }
+ av_log(s, AV_LOG_INFO, "\n");
+ if (i == length) {
+ av_log(s, AV_LOG_ERROR, "Invalid frequency range\n");
+ return AVERROR(EINVAL);
+ }
+ if (!sdr->max_freq)
+ sdr->max_freq = ranges[i].maximum;
+ if (!sdr->min_freq)
+ sdr->min_freq = ranges[i].minimum;
+ free(ranges); ranges = NULL;
+ av_log(s, AV_LOG_INFO, "frequency range: %"PRId64" - %"PRId64"\n", sdr->min_freq, sdr->max_freq);
+ //TODO do any drivers support multiple distinct frequency ranges ? if so we pick just one, thats not ideal
+
+ ranges = SoapySDRDevice_getSampleRateRange(sdr->soapy, SOAPY_SDR_RX, 0, &length);
+ max_sample_rate = 0;
+ av_log(s, AV_LOG_INFO, "SampleRate ranges: ");
+ for (i = 0; i < length; i++) {
+ av_log(s, AV_LOG_INFO, "[%g Hz -> %g Hz], ", ranges[i].minimum, ranges[i].maximum);
+ if (sdr->sdr_sample_rate &&
+ (sdr->sdr_sample_rate < ranges[i].minimum || sdr->sdr_sample_rate > ranges[i].maximum))
+ continue;
+ max_sample_rate = FFMAX(max_sample_rate, ranges[i].maximum);
+ }
+ av_log(s, AV_LOG_INFO, "\n");
+ free(ranges); ranges = NULL;
+ if (!sdr->sdr_sample_rate) {
+ sdr->sdr_sample_rate = max_sample_rate;
+ }
+
+ // We disallow odd sample rates as they result in either center or endpoint frequencies to be non integer. No big deal but simpler is better
+ if (!max_sample_rate || sdr->sdr_sample_rate%2) {
+ av_log(s, AV_LOG_ERROR, "Invalid sdr sample rate\n");
+ return AVERROR(EINVAL);
+ }
+
+ ranges = SoapySDRDevice_getBandwidthRange(sdr->soapy, SOAPY_SDR_RX, 0, &length);
+ av_log(s, AV_LOG_INFO, "Bandwidth ranges: ");
+ for (i = 0; i < length; i++) {
+ av_log(s, AV_LOG_INFO, "[%g Hz -> %g Hz], ", ranges[i].minimum, ranges[i].maximum);
+ }
+ av_log(s, AV_LOG_INFO, "\n");
+ free(ranges); ranges = NULL;
+
+ //apply settings
+ if (SoapySDRDevice_setSampleRate(sdr->soapy, SOAPY_SDR_RX, 0, sdr->sdr_sample_rate) != 0) {
+ av_log(s, AV_LOG_ERROR, "setSampleRate fail: %s\n", SoapySDRDevice_lastError());
+ return AVERROR_EXTERNAL;
+ }
+ ret = set_sdr_freq(sdr, sdr->wanted_freq);
+ if (ret < 0)
+ return ret;
+
+ //setup a stream (complex floats)
+#if SOAPY_SDR_API_VERSION < 0x00080000 // The old version is still widely used so we must support it
+ if (SoapySDRDevice_setupStream(sdr->soapy, &sdr->soapyRxStream, SOAPY_SDR_RX, SOAPY_SDR_CF32, NULL, 0, NULL))
+ sdr->soapyRxStream = NULL;
+#else
+ sdr->soapyRxStream = SoapySDRDevice_setupStream(sdr->soapy, SOAPY_SDR_RX, SOAPY_SDR_CF32, NULL, 0, NULL);
+#endif
+ if (!sdr->soapyRxStream) {
+ av_log(s, AV_LOG_ERROR, "setupStream fail: %s\n", SoapySDRDevice_lastError());
+ return AVERROR_EXTERNAL;
+ }
+
+ sdr->bandwidth = SoapySDRDevice_getBandwidth(sdr->soapy, SOAPY_SDR_RX, 0);
+ av_log(s, AV_LOG_INFO, "bandwidth %"PRId64"\n", sdr->bandwidth);
+
+ SoapySDRDevice_activateStream(sdr->soapy, sdr->soapyRxStream, 0, 0, 0);
+ } else
+#endif // CONFIG_SDR_DEMUXER
+ {
+ int version;
+ avio_skip(s->pb, 5); //FFSDR
+ version = avio_rb24(s->pb); //000
+ avio_skip(s->pb, 8); //int16BE
+ sdr->sdr_sample_rate = avio_rb32(s->pb);
+ avio_rb32(s->pb); //block_size
+ sdr->wanted_freq = av_int2double(avio_rb64(s->pb));
+ sdr->pts = avio_rb64(s->pb);
+ if (version > AV_RB24("000")) {
+ sdr->bandwidth = avio_rb32(s->pb);
+ sdr->fileheader_size = avio_rb32(s->pb);
+ } else {
+ sdr->bandwidth = sdr->sdr_sample_rate;
+ sdr->fileheader_size = 40;
+ }
+
+ avio_seek(s->pb, 0, SEEK_SET);
+
+ ret = set_sdr_freq(sdr, sdr->wanted_freq);
+ if (ret < 0)
+ return ret;
+ }
+
+ sdr->min_center_freq = sdr->min_freq + sdr->sdr_sample_rate / 2;
+ sdr->max_center_freq = sdr->max_freq + sdr->sdr_sample_rate / 2;
+
+
+ if(!sdr->block_size) {
+ for(sdr->block_size = 1; 25*sdr->block_size < sdr->sdr_sample_rate; sdr->block_size <<=1)
+ ;
+ } else if(sdr->block_size & (sdr->block_size - 1)) {
+ av_log(s, AV_LOG_ERROR, "Block size must be a power of 2\n");
+ return AVERROR(EINVAL);
+ }
+ av_log(s, AV_LOG_INFO, "Block size %d\n", sdr->block_size);
+
+
+ sdr->windowed_block = av_malloc(sizeof(*sdr->windowed_block) * 2 * sdr->block_size);
+ sdr->block = av_malloc(sizeof(*sdr->block ) * 2 * sdr->block_size);
+ sdr->len2block = av_malloc(sizeof(*sdr->len2block) * 2 * sdr->block_size);
+ sdr->window = av_malloc(sizeof(*sdr->window ) * 2 * sdr->block_size);
+ if (!sdr->windowed_block || !sdr->len2block || !sdr->block || !sdr->window)
+ return AVERROR(ENOMEM);
+
+ ret = av_tx_init(&sdr->fft_ctx, &sdr->fft, AV_TX_FLOAT_FFT, 0, 2*sdr->block_size, NULL, 0);
+ if (ret < 0)
+ return ret;
+
+ avpriv_kbd_window_init(sdr->window, 8, sdr->block_size);
+
+ for(int i = sdr->block_size; i < 2 * sdr->block_size; i++) {
+ sdr->window[i] = sdr->window[2*sdr->block_size - i - 1];
+ }
+ for (int i = 0; i < 2 * sdr->block_size; i++)
+ sdr->window[i] *= ((i&1) ? 1:-1);
+
+ for (int stream_index = 0; stream_index < s->nb_streams; stream_index++) {
+ AVStream *st = s->streams[stream_index];
+ SDRStream *sst = st->priv_data;
+ // Setup streams which are independant of stations and modulations
+ // Others cannot be setup yet
+ if (st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO) {
+ sst->frame_size = sdr->width * sdr->height * 4;
+ sst->frame_buffer = av_malloc(sst->frame_size * 2);
+ if (!sst->frame_buffer)
+ return AVERROR(ENOMEM);
+ }
+ }
+
+ sdr->pts = 0;
+
+ sdr->empty_block_fifo = av_fifo_alloc2(1, sizeof(FIFOElement), AV_FIFO_FLAG_AUTO_GROW);
+ sdr-> full_block_fifo = av_fifo_alloc2(1, sizeof(FIFOElement), AV_FIFO_FLAG_AUTO_GROW);
+ if (!sdr->empty_block_fifo || !sdr-> full_block_fifo)
+ return AVERROR(ENOMEM);
+ //Limit fifo to 1second to avoid OOM
+ av_fifo_auto_grow_limit(sdr->empty_block_fifo, sdr->sdr_sample_rate / sdr->block_size);
+ av_fifo_auto_grow_limit(sdr-> full_block_fifo, sdr->sdr_sample_rate / sdr->block_size);
+
+ atomic_init(&sdr->close_requested, 0);
+ ret = pthread_mutex_init(&sdr->mutex, NULL);
+ if (ret) {
+ av_log(s, AV_LOG_ERROR, "pthread_mutex_init failed: %s\n", strerror(ret));
+ return AVERROR(ret);
+ }
+ ret = pthread_create(&sdr->soapy_thread, NULL, (void*)soapy_needs_bigger_buffers_worker, sdr);
+ if (ret != 0) {
+ av_log(s, AV_LOG_ERROR, "pthread_create failed : %s\n", strerror(ret));
+ pthread_mutex_destroy(&sdr->mutex);
+ return AVERROR(ret);
+ }
+ sdr->thread_started = 1;
+
+ if(sdr->dump_url) {
+ ret = avio_open2(&sdr->dump_avio, sdr->dump_url, AVIO_FLAG_WRITE, NULL, NULL);
+ if (ret < 0) {
+ fprintf(stderr, "Unable to open %s\n", sdr->dump_url);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static inline void draw_point_component(uint8_t *frame_buffer, ptrdiff_t stride, int x, int y, int r, int g, int b, int w, int h)
+{
+ uint8_t *p;
+
+ if (x<0 || y<0 || x>=w || y>=h)
+ return;
+ p = frame_buffer + 4*x + stride*y;
+
+ p[0] = av_clip_uint8(p[0] + (b>>16));
+ p[1] = av_clip_uint8(p[1] + (g>>16));
+ p[2] = av_clip_uint8(p[2] + (r>>16));
+}
+
+// Draw a point with subpixel precission, (it looked bad otherwise)
+static void draw_point(uint8_t *frame_buffer, ptrdiff_t stride, int x, int y, int r, int g, int b, int w, int h)
+{
+ int px = x>>8;
+ int py = y>>8;
+ int sx = x&255;
+ int sy = y&255;
+ int s;
+
+ s = (256 - sx) * (256 - sy);
+ draw_point_component(frame_buffer, stride, px , py , r*s, g*s, b*s, w, h);
+ s = sx * (256 - sy);
+ draw_point_component(frame_buffer, stride, px+1, py , r*s, g*s, b*s, w, h);
+ s = (256 - sx) * sy;
+ draw_point_component(frame_buffer, stride, px , py+1, r*s, g*s, b*s, w, h);
+ s = sx * sy;
+ draw_point_component(frame_buffer, stride, px+1, py+1, r*s, g*s, b*s, w, h);
+}
+
+static int sdr_read_packet(AVFormatContext *s,
+ AVPacket *pkt)
+{
+ SDRContext *sdr = s->priv_data;
+ int ret, i, full_blocks, seek_direction;
+ FIFOElement fifo_element[2];
+
+process_next_block:
+
+ for (int stream_index = 0; stream_index < s->nb_streams; stream_index++) {
+ AVStream *st = s->streams[stream_index];
+ SDRStream *sst = st->priv_data;
+
+ if (sst->processing_index) {
+ int skip = 1;
+ if (st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO) {
+ int w = st->codecpar->width;
+ int h = st->codecpar->height;
+ int h2 = FFMIN(64, h / 4);
+ int frame_index = av_rescale(sdr->pts, sdr->fps.num, sdr->fps.den * TIMEBASE);
+ int last_index = av_rescale(sdr->last_pts, sdr->fps.num, sdr->fps.den * TIMEBASE);
+ skip = frame_index == last_index || sdr->missing_streams;
+ av_assert0(sdr->missing_streams >= 0);
+
+ for(int x= 0; x<w; x++) {
+ int color;
+ int idx = 4*(x + sst->frame_buffer_line*w);
+ int bindex = x * 2ll * sdr->block_size / w;
+ int bindex2 = (x+1) * 2ll * sdr->block_size / w;
+ float a = 0;
+ av_assert0(bindex2 <= 2 * sdr->block_size);
+ for (int i = bindex; i < bindex2; i++) {
+ AVComplexFloat sample = sdr->block[i];
+ a += len2(sample);
+ }
+ color = lrintf(log(a)*8 + 32);
+
+ sst->frame_buffer[idx + 0] = color;
+ sst->frame_buffer[idx + 1] = color;
+ sst->frame_buffer[idx + 2] = color;
+ sst->frame_buffer[idx + 3] = 255;
+ }
+
+ // Display locations of all vissible stations
+ for(int station_index = 0; station_index<sdr->nb_stations; station_index++) {
+ Station *s = sdr->station[station_index];
+ double f = s->frequency;
+// int bw = s->bandwidth;
+// int xleft = 256*((f-bw) - sdr->block_center_freq + sdr->sdr_sample_rate/2) * w / sdr->sdr_sample_rate;
+// int xright= 256*((f+bw) - sdr->block_center_freq + sdr->sdr_sample_rate/2) * w / sdr->sdr_sample_rate;
+ int xmid = 256*( f - sdr->block_center_freq + sdr->sdr_sample_rate/2) * w / sdr->sdr_sample_rate;
+ int g = s->modulation == AM ? 50 : 0;
+ int b = s->modulation == AM ? 0 : 70;
+ int r = s->stream ? 50 : 0;
+
+ draw_point(sst->frame_buffer, 4*w, xmid, 256*(sst->frame_buffer_line+1), r, g, b, w, h);
+ }
+
+ if (!skip) {
+ ret = av_new_packet(pkt, sst->frame_size);
+ if (ret < 0)
+ return ret;
+
+ for(int y= 0; y<h2; y++) {
+ for(int x= 0; x<w; x++) {
+ int color;
+ int idx = x + y*w;
+ int idx_t = (idx / h2) + (idx % h2)*w;
+ int bindex = idx * 2ll * sdr->block_size / (w * h2);
+ int bindex2 = (idx+1) * 2ll * sdr->block_size / (w * h2);
+ float a = 0;
+ av_assert0(bindex2 <= 2 * sdr->block_size);
+ for (int i = bindex; i < bindex2; i++) {
+ AVComplexFloat sample = sdr->block[i];
+ a += len2(sample);
+ }
+ color = lrintf(log(a)*9 + 64);
+
+ idx_t *= 4;
+
+ pkt->data[idx_t+0] = color;
+ pkt->data[idx_t+1] = color;
+ pkt->data[idx_t+2] = color;
+ pkt->data[idx_t+3] = 255;
+ }
+ }
+ for (int y= h2; y<h; y++)
+ memcpy(pkt->data + 4*y*w, sst->frame_buffer + 4*(y + sst->frame_buffer_line - h2)*w, 4*w);
+ }
+
+ if (!sst->frame_buffer_line) {
+ memcpy(sst->frame_buffer + sst->frame_size, sst->frame_buffer, sst->frame_size);
+ sst->frame_buffer_line = h-1;
+ } else
+ sst->frame_buffer_line--;
+
+//TODO
+// draw RDS*
+// draw frequencies
+ } else if (st->codecpar->codec_type == AVMEDIA_TYPE_AUDIO) {
+ if (sst->station) {
+ skip = 0;
+ ret = modulation_descs[ sst->station->modulation ].demodulate(sdr, stream_index, pkt);
+ if (ret < 0) {
+ av_log(s, AV_LOG_ERROR, "demodulation failed ret = %d\n", ret);
+ }
+ }
+ } else
+ av_assert0(0);
+ sst->processing_index = 0;
+ if (pkt && !skip) {
+ pkt->stream_index = stream_index;
+ pkt->dts = (sdr->pts & (-1<<FREQ_BITS));
+ if (sst->station)
+ pkt->dts += lrint(sst->station->frequency/1000);
+ pkt->pts = pkt->dts;
+
+ return 0;
+ }
+ }
+ }
+
+ pthread_mutex_lock(&sdr->mutex);
+ full_blocks = av_fifo_can_read(sdr->full_block_fifo) - 1;
+ ret = av_fifo_peek(sdr->full_block_fifo, &fifo_element, 2, 0);
+ if (ret >= 0)
+ av_fifo_drain2(sdr->full_block_fifo, 1);
+ seek_direction = sdr->seek_direction; //This doesnt need a mutex here at all but tools might complain
+ pthread_mutex_unlock(&sdr->mutex);
+
+ if (ret < 0) {
+ av_log(s, AV_LOG_DEBUG, "EAGAIN on not enough data\n");
+ return AVERROR(EAGAIN);
+ }
+ if (fifo_element[0].center_frequency != fifo_element[1].center_frequency) {
+ av_log(s, AV_LOG_DEBUG, "Mismatching frequency blocks\n");
+// fifo_element[0].center_frequency = 0;
+// inject_block_into_fifo(sdr, sdr->empty_block_fifo, &fifo_element, "Cannot pass next buffer, freeing it\n");
+ //Its simpler to just continue than to discard this, but we must make sure that on seeking we have matching blocks for each block we want to scan
+ sdr->block_center_freq = 0;
+ sdr->skip_probe = 1; // we want to probe the next block as it will have new frequencies
+ } else
+ sdr->block_center_freq = fifo_element[0].center_frequency;
+
+ if (sdr->dump_avio) {
+ uint8_t header[48] = "FFSDR001int16BE";
+ uint8_t *tmp = (void*)sdr->windowed_block; //We use an unused array as temporary here
+
+ AV_WB32(header+16, sdr->sdr_sample_rate);
+ AV_WB32(header+20, sdr->block_size);
+ AV_WB64(header+24, av_double2int(fifo_element[0].center_frequency));
+ AV_WB64(header+32, sdr->pts);
+ AV_WB32(header+40, sdr->bandwidth);
+ AV_WB32(header+44, sizeof(header));
+
+ avio_write(sdr->dump_avio, header, sizeof(header));
+
+ //We do ask Soapy for 32bit complex floats as they are easier to work with but really the hardware generally produces integers and no 32bits
+ //For storage int16 is supperior as it needs less space
+ for(int i=0; i<sdr->block_size; i++) {
+ AV_WB16(tmp + 4*i + 0, lrint(fifo_element[0].halfblock[i].re * 32768));
+ AV_WB16(tmp + 4*i + 2, lrint(fifo_element[0].halfblock[i].im * 32768));
+ }
+ avio_write(sdr->dump_avio, tmp, 4*sdr->block_size);
+ }
+
+ for (i = 0; i<sdr->block_size; i++) {
+ sdr->windowed_block[i].re = fifo_element[0].halfblock[i].re * sdr->window[i];
+ sdr->windowed_block[i].im = fifo_element[0].halfblock[i].im * sdr->window[i];
+ }
+ for (i = sdr->block_size; i<2*sdr->block_size; i++) {
+ sdr->windowed_block[i].re = fifo_element[1].halfblock[i - sdr->block_size].re * sdr->window[i];
+ sdr->windowed_block[i].im = fifo_element[1].halfblock[i - sdr->block_size].im * sdr->window[i];
+ }
+
+ inject_block_into_fifo(sdr, sdr->empty_block_fifo, &fifo_element[0], "Cannot pass next buffer, freeing it\n");
+#ifdef SYN_TEST //synthetic test signal
+ static int64_t synp=0;
+ AVLFG avlfg;
+ if(!synp)
+ av_lfg_init(&avlfg, 0);
+ for(int i = 0; i<2*sdr->block_size; i++) {
+ double f = F2INDEX(7123456.78901234567);
+ int64_t synp2 = synp % (40*sdr->block_size);
+ double fsig0 = 0.00002;
+ double fsig2= 123;
+
+ if (!i)
+ av_log(0,0, "i= %f %f\n", f, INDEX2F(f));
+ double noise[2] = {0,0};
+ double sig0 = 1.0 + 0.25*sin(synp2*fsig0*synp2*M_PI / sdr->block_size);
+ double sig2 = 0.1 + 0.03*cos(synp*fsig2*M_PI / sdr->block_size);
+ if (i & 256)
+ av_bmg_get(&avlfg, noise);
+ sdr->windowed_block[i].re = (noise[0]*0.0000001 + 0.00001*sig0*sin(synp*M_PI*(f)/sdr->block_size)
+ + 0.00001*sig2*cos(synp*M_PI*(f)/sdr->block_size)
+ ) * fabs(sdr->window[i]);
+ sdr->windowed_block[i].im = noise[1]*0.0000001 * sdr->window[i];
+ synp++;
+ }
+ synp -= sdr->block_size;
+#endif
+
+
+ sdr->fft(sdr->fft_ctx, sdr->block, sdr->windowed_block, sizeof(AVComplexFloat));
+ // windowed_block is unused now, we can fill it with the next blocks data
+
+ if (sdr->block_center_freq) {
+ if (sdr->skip_probe-- <= 0) {
+ //Probing takes a bit of time, lets not do it every time
+ sdr->skip_probe = 5;
+ probe_common(sdr);
+
+ for(int i = 0; i < FF_ARRAY_ELEMS(modulation_descs); i++) {
+ ModulationDescriptor *md = &modulation_descs[i];
+ md->probe(sdr);
+ av_assert0(i == md->modulation);
+ }
+
+ decay_stations(sdr);
+ }
+
+ if (sdr->mode == SingleStationMode) {
+ AVStream *st = s->streams[sdr->single_ch_audio_st_index];
+ SDRStream *sst = st->priv_data;
+
+ if (!sst->station || seek_direction) {
+ double current_freq;
+ double best_distance = INT64_MAX;
+ Station *best_station = NULL;
+
+ if (sst->station) {
+ current_freq = sst->station->frequency;
+ } else if (sdr->station_freq) {
+ current_freq = sdr->station_freq;
+ } else
+ current_freq = sdr->block_center_freq;
+
+ for(int i = 0; i<sdr->nb_stations; i++) {
+ Station *station = sdr->station[i];
+ double distance = station->frequency - current_freq;
+
+ if (distance * seek_direction < 0 || station == sst->station)
+ continue;
+ distance = fabs(distance);
+ if (distance < best_distance) {
+ best_distance = distance;
+ best_station = station;
+ }
+ }
+ av_assert0(!best_station || best_station != sst->station);
+ if (best_station) {
+ ret = setup_stream(sdr, sdr->single_ch_audio_st_index, best_station);
+ if (ret < 0) {
+ av_log(s, AV_LOG_DEBUG, "setup_stream failed\n");
+ return ret;
+ }
+
+ pthread_mutex_lock(&sdr->mutex);
+ sdr->seek_direction =
+ seek_direction = 0;
+ sdr->wanted_freq = lrint(best_station->frequency + 213*1000); // We target a bit off teh exact frequency to avoid artifacts
+ //200*1000 had artifacts
+
+ av_log(s, AV_LOG_DEBUG, "request f = %"PRId64"\n", sdr->wanted_freq);
+ pthread_mutex_unlock(&sdr->mutex);
+ }
+ }
+ } else {
+ av_assert0(sdr->mode == AllStationMode);
+ for(int i = 0; i<sdr->nb_stations; i++) {
+ Station *station = sdr->station[i];
+ if (!station->stream) {
+ /* audio stream */
+ AVStream *st = avformat_new_stream(s, NULL);
+ SDRStream *sst;
+ if (!st)
+ return AVERROR(ENOMEM);
+ sst = av_mallocz(sizeof(*sst));
+ if (!sst)
+ return AVERROR(ENOMEM);
+ st->priv_data = sst;
+ st->codecpar->codec_type = AVMEDIA_TYPE_AUDIO;
+ st->codecpar->codec_tag = 0; /* no fourcc */
+ st->codecpar->codec_id = HAVE_BIGENDIAN ? AV_CODEC_ID_PCM_F32BE : AV_CODEC_ID_PCM_F32LE;
+ st->codecpar->ch_layout = (AVChannelLayout)AV_CHANNEL_LAYOUT_STEREO;
+ st->codecpar->sample_rate = 0; // will be set later
+ avpriv_set_pts_info(st, 64, 1, (48000/128) << FREQ_BITS);
+ ret = setup_stream(sdr, st->index, station);
+ if (ret < 0)
+ return ret;
+ sdr->missing_streams++;
+ }
+ }
+ }
+
+ // new data is available for all streams, lets tell them
+ //TODO with mixed blocks during scanning theres more than one block_center_freq, we may want to try to support them as they likely have demodulatable data
+ for (int stream_index = 0; stream_index < s->nb_streams; stream_index++) {
+ AVStream *st = s->streams[stream_index];
+ SDRStream *sst = st->priv_data;
+ sst->processing_index += sdr->block_size;
+ }
+ }
+
+ sdr->last_pts = sdr->pts;
+ sdr->pts += av_rescale(sdr->block_size, TIMEBASE, sdr->sdr_sample_rate);
+
+ //some user apps force a delay on EAGAIN so we cannot always return EAGAIN or we overflow the fifos
+ if (full_blocks >= 2)
+ goto process_next_block;
+
+ return AVERROR(EAGAIN);
+}
+
+static int sdr_read_seek(AVFormatContext *s, int stream_index,
+ int64_t target, int flags)
+{
+ SDRContext *sdr = s->priv_data;
+ int64_t freq, step;
+ int dir = (flags & AVSEEK_FLAG_BACKWARD) ? -1 : 1;
+ AVStream *st = s->streams[stream_index];
+ SDRStream *sst = st->priv_data;
+
+ if (sdr->mode != SingleStationMode) {
+ return AVERROR(ENOTSUP);
+ }
+
+ av_assert0(stream_index >= 0);
+
+ step = FFABS(target - sdr->pts);
+ if (step < 35 * TIMEBASE) {
+ target = (sdr->pts & (-1<<FREQ_BITS)) + dir;
+ if (sst->station)
+ target += lrint(sst->station->frequency/1000);
+ }else if (step < 330 * TIMEBASE)
+ return AVERROR(ENOTSUP); // Seek to next/prev band
+ else
+ return AVERROR(ENOTSUP); // Reserved for future ideas
+
+ freq = (target & ((1<<FREQ_BITS) - 1)) * 1000LL;
+
+ pthread_mutex_lock(&sdr->mutex);
+ sdr->seek_direction = dir;
+ pthread_mutex_unlock(&sdr->mutex);
+ flush_fifo(sdr, sdr->full_block_fifo);
+ return 0;
+}
+
+static int sdr_read_close(AVFormatContext *s)
+{
+ SDRContext *sdr = s->priv_data;
+ int i;
+
+ atomic_store(&sdr->close_requested, 1);
+
+ if(sdr->thread_started)
+ pthread_join(sdr->soapy_thread, NULL);
+
+ flush_fifo(sdr, sdr->empty_block_fifo); //needs mutex to be still around
+ flush_fifo(sdr, sdr-> full_block_fifo); //needs mutex to be still around
+
+ if(sdr->thread_started)
+ pthread_mutex_destroy(&sdr->mutex);
+
+ av_fifo_freep2(&sdr->empty_block_fifo);
+ av_fifo_freep2(&sdr->full_block_fifo);
+
+ for (i = 0; i < s->nb_streams; i++) {
+ AVStream *st = s->streams[i];
+ SDRStream *sst = st->priv_data;
+
+ free_stream(sdr, i);
+
+ av_freep(&sst->frame_buffer);
+ sst->frame_size = 0;
+ }
+
+ for (i = 0; i < sdr->nb_stations; i++) {
+ free_station(sdr->station[i]);
+ }
+ sdr->nb_stations = 0;
+ av_freep(&sdr->station);
+
+#if CONFIG_SDR_DEMUXER
+ if (sdr->soapy) {
+ if (sdr->soapyRxStream) {
+ SoapySDRDevice_deactivateStream(sdr->soapy, sdr->soapyRxStream, 0, 0);
+ SoapySDRDevice_closeStream(sdr->soapy, sdr->soapyRxStream);
+ sdr->soapyRxStream = NULL;
+ }
+
+ SoapySDRDevice_unmake(sdr->soapy);
+ sdr->soapy = NULL;
+ }
+#endif //CONFIG_SDR_DEMUXER
+
+ av_freep(&sdr->windowed_block);
+ av_freep(&sdr->block);
+ av_freep(&sdr->len2block);
+ av_freep(&sdr->window);
+
+ av_tx_uninit(&sdr->fft_ctx);
+ sdr->fft = NULL;
+
+ avio_close(sdr->dump_avio);
+
+ return 0;
+}
+
+static int sdrfile_probe(const AVProbeData *p)
+{
+ if (!memcmp(p->buf , "FFSDR00", 7) &&
+ !memcmp(p->buf+8, "int16BE", 7)) {
+ return AVPROBE_SCORE_MAX;
+ } else
+ return 0;
+}
+
+#define OFFSET(x) offsetof(SDRContext, x)
+#define DEC AV_OPT_FLAG_DECODING_PARAM
+
+static const AVOption options[] = {
+ { "video_size", "set frame size", OFFSET(width), AV_OPT_TYPE_IMAGE_SIZE, {.str = "800x600"}, 0, 0, DEC },
+ { "framerate" , "set frame rate", OFFSET(fps), AV_OPT_TYPE_VIDEO_RATE, {.str = "25"}, 0, INT_MAX,DEC },
+ { "block_size", "FFT block size", OFFSET(block_size), AV_OPT_TYPE_INT, {.i64 = 0}, 0, INT_MAX, DEC},
+ { "mode", "" , OFFSET(mode), AV_OPT_TYPE_INT, {.i64 = SingleStationMode}, 0, ModeNB-1, DEC, "mode"},
+ { "single_mode", "Demodulate 1 station", 0, AV_OPT_TYPE_CONST, {.i64 = SingleStationMode}, 0, 0, DEC, "mode"},
+ { "all_mode" , "Demodulate all station", 0, AV_OPT_TYPE_CONST, {.i64 = AllStationMode}, 0, 0, DEC, "mode"},
+
+ { "station_freq", "current station/channel/stream frequency", OFFSET(station_freq), AV_OPT_TYPE_INT64, {.i64 = 88000000}, 0, INT64_MAX, DEC},
+
+ { "driver" , "sdr driver name" , OFFSET(driver_name), AV_OPT_TYPE_STRING, {.str = NULL}, 0, 0, DEC},
+ { "sdr_sr" , "sdr sample rate" , OFFSET(sdr_sample_rate ), AV_OPT_TYPE_INT , {.i64 = 0}, 0, INT_MAX, DEC},
+ { "sdr_freq", "sdr frequency" , OFFSET(wanted_freq), AV_OPT_TYPE_INT64 , {.i64 = 9000000}, 0, INT64_MAX, DEC},
+ { "sdr_agc" , "sdr automatic gain control", OFFSET(sdr_agc), AV_OPT_TYPE_BOOL , {.i64 = 1}, 0, 1, DEC},
+ { "min_freq", "minimum frequency", OFFSET(min_freq ), AV_OPT_TYPE_INT64 , {.i64 = 0}, 0, INT64_MAX, DEC},
+ { "max_freq", "maximum frequency", OFFSET(max_freq ), AV_OPT_TYPE_INT64 , {.i64 = 0}, 0, INT64_MAX, DEC},
+
+ { "dumpurl", "url to dump soapy output to" , OFFSET(dump_url), AV_OPT_TYPE_STRING , {.str = NULL}, 0, 0, DEC},
+ { "kbd_alpha", "Kaiser Bessel window parameter" , OFFSET(kbd_alpha), AV_OPT_TYPE_INT , {.i64 = 8}, 1, 16, DEC},
+
+
+ { "am_mode", "AM Demodulation Mode", OFFSET(am_mode ), AV_OPT_TYPE_INT , {.i64 = AMMidSide}, 0, AMModeNB-1, DEC, "am_mode"},
+ { "am_leftright", "AM Demodulation Left Right", 0, AV_OPT_TYPE_CONST, {.i64 = AMLeftRight}, 0, 0, DEC, "am_mode"},
+ { "am_midside", "AM Demodulation Mid Side", 0, AV_OPT_TYPE_CONST, {.i64 = AMMidSide}, 0, 0, DEC, "am_mode"},
+ { "am_inphase", "AM Demodulation In Phase", 0, AV_OPT_TYPE_CONST, {.i64 = AMInPhase}, 0, 0, DEC, "am_mode"},
+ { "am_envelope","AM Demodulation EnvelopeDC", 0, AV_OPT_TYPE_CONST, {.i64 = AMEnvelope}, 0, 0, DEC, "am_mode"},
+
+ { NULL },
+};
+
+#if CONFIG_SDR_DEMUXER
+static const AVClass sdr_demuxer_class = {
+ .class_name = "sdr",
+ .item_name = av_default_item_name,
+ .option = options,
+ .version = LIBAVUTIL_VERSION_INT,
+ .category = AV_CLASS_CATEGORY_DEMUXER,
+};
+
+const AVInputFormat ff_sdr_demuxer = {
+ .name = "sdr",
+ .long_name = NULL_IF_CONFIG_SMALL("Software Defined Radio Demodulator"),
+ .priv_data_size = sizeof(SDRContext),
+ .read_header = sdr_read_header,
+ .read_packet = sdr_read_packet,
+ .read_close = sdr_read_close,
+ .read_seek = sdr_read_seek,
+ .flags = AVFMT_NOFILE,
+ .flags_internal = FF_FMT_INIT_CLEANUP,
+ .priv_class = &sdr_demuxer_class,
+};
+#endif
+
+static const AVClass sdrfile_demuxer_class = {
+ .class_name = "sdrfile",
+ .item_name = av_default_item_name,
+ .option = options,
+ .version = LIBAVUTIL_VERSION_INT,
+ .category = AV_CLASS_CATEGORY_DEMUXER,
+};
+
+const AVInputFormat ff_sdrfile_demuxer = {
+ .name = "sdrfile",
+ .long_name = NULL_IF_CONFIG_SMALL("Software Defined Radio Demodulator (Using a file for testing)"),
+ .priv_data_size = sizeof(SDRContext),
+ .read_probe = sdrfile_probe,
+ .read_header = sdr_read_header,
+ .read_packet = sdr_read_packet,
+ .read_close = sdr_read_close,
+ .read_seek = sdr_read_seek,
+ .flags_internal = FF_FMT_INIT_CLEANUP,
+ .priv_class = &sdrfile_demuxer_class,
+};
--
2.31.1
More information about the ffmpeg-devel
mailing list