[FFmpeg-trac] #11434(undetermined:new): Unable to set channel count for Alsa input since release 5.1.1
FFmpeg
trac at avcodec.org
Tue Jan 28 02:21:18 EET 2025
#11434: Unable to set channel count for Alsa input since release 5.1.1
---------------------------------------+----------------------------------
Reporter: Brad Isbell | Type: defect
Status: new | Priority: normal
Component: undetermined | Version: 5.1.4
Keywords: alsa channels | Blocked By:
Blocking: | Reproduced by developer: 0
Analyzed by developer: 0 |
---------------------------------------+----------------------------------
Ever since release v5.1.1, setting channel count for an Alsa input has no
effect and seems to default to stereo. This worked on release v5.0.1.
Using John van Sickle builds on a 64-bit Pi, with a Ravenna AES67 audio
device.
Here you can see it working with v5.0.1. Note the number of channels
received and output in the stream.
{{{
ffmpeg-5.0.1-arm64-static/ffmpeg -loglevel trace -f alsa -ac 8
-guess_layout_max 0 -acodec pcm_s24le -i "hw:CARD=RAVENNA" -codec copy -f
null /dev/null
ffmpeg version 5.0.1-static https://johnvansickle.com/ffmpeg/ Copyright
(c) 2000-2022 the FFmpeg developers
built with gcc 8 (Debian 8.3.0-6)
configuration: --enable-gpl --enable-version3 --enable-static --disable-
debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio
--cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp
--enable-libgme --enable-gray --enable-libaom --enable-libfribidi
--enable-libass --enable-libfreetype --enable-libmp3lame --enable-
libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg
--enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt
--enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab
--enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264
--enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid
--enable-libzimg
libavutil 57. 17.100 / 57. 17.100
libavcodec 59. 18.100 / 59. 18.100
libavformat 59. 16.100 / 59. 16.100
libavdevice 59. 4.100 / 59. 4.100
libavfilter 8. 24.100 / 8. 24.100
libswscale 6. 4.100 / 6. 4.100
libswresample 4. 3.100 / 4. 3.100
libpostproc 56. 3.100 / 56. 3.100
Splitting the commandline.
Reading option '-loglevel' ... matched as option 'loglevel' (set logging
level) with argument 'trace'.
Reading option '-f' ... matched as option 'f' (force format) with argument
'alsa'.
Reading option '-ac' ... matched as option 'ac' (set number of audio
channels) with argument '8'.
Reading option '-guess_layout_max' ... matched as option
'guess_layout_max' (set the maximum number of channels to try to guess the
channel layout) with argument '0'.
Reading option '-acodec' ... matched as option 'acodec' (force audio codec
('copy' to copy stream)) with argument 'pcm_s24le'.
Reading option '-i' ... matched as input url with argument
'hw:CARD=RAVENNA'.
Reading option '-codec' ... matched as option 'codec' (codec name) with
argument 'copy'.
Reading option '-f' ... matched as option 'f' (force format) with argument
'null'.
Reading option '/dev/null' ... matched as output url.
Finished splitting the commandline.
Parsing a group of options: global .
Applying option loglevel (set logging level) with argument trace.
Successfully parsed a group of options.
Parsing a group of options: input url hw:CARD=RAVENNA.
Applying option f (force format) with argument alsa.
Applying option ac (set number of audio channels) with argument 8.
Applying option guess_layout_max (set the maximum number of channels to
try to guess the channel layout) with argument 0.
Applying option acodec (force audio codec ('copy' to copy stream)) with
argument pcm_s24le.
Successfully parsed a group of options.
Opening an input file: hw:CARD=RAVENNA.
[alsa @ 0x1cdef2d0] All info found
[alsa @ 0x1cdef2d0] stream 0: start_time: 1.73802e+09 duration: NOPTS
[alsa @ 0x1cdef2d0] format: start_time: 1.73802e+09 duration: NOPTS
(estimate from bit rate) bitrate=9216 kb/s
Input #0, alsa, from 'hw:CARD=RAVENNA':
Duration: N/A, start: 1738023146.060336, bitrate: 9216 kb/s
Stream #0:0, 1, 1/1000000: Audio: pcm_s24le, 48000 Hz, 8 channels, s32
(24 bit), 9216 kb/s
Successfully opened the file.
Parsing a group of options: output url /dev/null.
Applying option codec (codec name) with argument copy.
Applying option f (force format) with argument null.
Successfully parsed a group of options.
Opening an output file: /dev/null.
Successfully opened the file.
Output #0, null, to '/dev/null':
Metadata:
encoder : Lavf59.16.100
Stream #0:0, 0, 1/1000000: Audio: pcm_s24le, 48000 Hz, 8 channels, s32
(24 bit), 9216 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (copy)
Press [q] to stop, [?] for help
cur_dts is invalid st:0 (0) [init:1 i_done:0 finish:0] (this is harmless
if it occurs once at the start per stream)
size=N/A time=00:00:02.52 bitrate=N/A speed=0.998x
[q] command received. Exiting.
size=N/A time=00:00:02.78 bitrate=N/A speed=0.997x
video:0kB audio:3128kB subtitle:0kB other streams:0kB global headers:0kB
muxing overhead: unknown
Input file #0 (hw:CARD=RAVENNA):
Input stream #0:0 (audio): 2085 packets read (3202560 bytes);
Total: 2085 packets (3202560 bytes) demuxed
Output file #0 (/dev/null):
Output stream #0:0 (audio): 2085 packets muxed (3202560 bytes);
Total: 2085 packets (3202560 bytes) muxed
0 frames successfully decoded, 0 decoding errors
}}}
Now, here's it broken in v5.1.1. Again, note the resulting channel
counts, even though you can see in the trace that a channel count of `8`
was set.
{{{
ffmpeg-5.1.1-arm64-static/ffmpeg -loglevel trace -f alsa -ac 8
-guess_layout_max 0 -acodec pcm_s24le -i "hw:CARD=RAVENNA" -codec copy -f
null /dev/null
ffmpeg version 5.1.1-static https://johnvansickle.com/ffmpeg/ Copyright
(c) 2000-2022 the FFmpeg developers
built with gcc 8 (Debian 8.3.0-6)
configuration: --enable-gpl --enable-version3 --enable-static --disable-
debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio
--cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp
--enable-libgme --enable-gray --enable-libaom --enable-libfribidi
--enable-libass --enable-libfreetype --enable-libmp3lame --enable-
libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg
--enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt
--enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab
--enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264
--enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid
--enable-libzimg
libavutil 57. 28.100 / 57. 28.100
libavcodec 59. 37.100 / 59. 37.100
libavformat 59. 27.100 / 59. 27.100
libavdevice 59. 7.100 / 59. 7.100
libavfilter 8. 44.100 / 8. 44.100
libswscale 6. 7.100 / 6. 7.100
libswresample 4. 7.100 / 4. 7.100
libpostproc 56. 6.100 / 56. 6.100
Splitting the commandline.
Reading option '-loglevel' ... matched as option 'loglevel' (set logging
level) with argument 'trace'.
Reading option '-f' ... matched as option 'f' (force format) with argument
'alsa'.
Reading option '-ac' ... matched as option 'ac' (set number of audio
channels) with argument '8'.
Reading option '-guess_layout_max' ... matched as option
'guess_layout_max' (set the maximum number of channels to try to guess the
channel layout) with argument '0'.
Reading option '-acodec' ... matched as option 'acodec' (force audio codec
('copy' to copy stream)) with argument 'pcm_s24le'.
Reading option '-i' ... matched as input url with argument
'hw:CARD=RAVENNA'.
Reading option '-codec' ... matched as option 'codec' (codec name) with
argument 'copy'.
Reading option '-f' ... matched as option 'f' (force format) with argument
'null'.
Reading option '/dev/null' ... matched as output url.
Finished splitting the commandline.
Parsing a group of options: global .
Applying option loglevel (set logging level) with argument trace.
Successfully parsed a group of options.
Parsing a group of options: input url hw:CARD=RAVENNA.
Applying option f (force format) with argument alsa.
Applying option ac (set number of audio channels) with argument 8.
Applying option guess_layout_max (set the maximum number of channels to
try to guess the channel layout) with argument 0.
Applying option acodec (force audio codec ('copy' to copy stream)) with
argument pcm_s24le.
Successfully parsed a group of options.
Opening an input file: hw:CARD=RAVENNA.
[alsa @ 0x2d8252d0] All info found
[alsa @ 0x2d8252d0] stream 0: start_time: 1.73802e+09 duration: NOPTS
[alsa @ 0x2d8252d0] format: start_time: 1.73802e+09 duration: NOPTS
(estimate from bit rate) bitrate=2304 kb/s
Input #0, alsa, from 'hw:CARD=RAVENNA':
Duration: N/A, start: 1738023154.233247, bitrate: 2304 kb/s
Stream #0:0, 1, 1/1000000: Audio: pcm_s24le, 48000 Hz, 2 channels, s32
(24 bit), 2304 kb/s
Successfully opened the file.
Parsing a group of options: output url /dev/null.
Applying option codec (codec name) with argument copy.
Applying option f (force format) with argument null.
Successfully parsed a group of options.
Opening an output file: /dev/null.
Successfully opened the file.
Output #0, null, to '/dev/null':
Metadata:
encoder : Lavf59.27.100
Stream #0:0, 0, 1/1000000: Audio: pcm_s24le, 48000 Hz, 2 channels, s32
(24 bit), 2304 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (copy)
Press [q] to stop, [?] for help
cur_dts is invalid st:0 (0) [init:1 i_done:0 finish:0] (this is harmless
if it occurs once at the start per stream)
size=N/A time=00:00:02.51 bitrate=N/A speed=0.998x
[q] command received. Exiting.
size=N/A time=00:00:02.66 bitrate=N/A speed=0.998x
video:0kB audio:750kB subtitle:0kB other streams:0kB global headers:0kB
muxing overhead: unknown
Input file #0 (hw:CARD=RAVENNA):
Input stream #0:0 (audio): 1999 packets read (767616 bytes);
Total: 1999 packets (767616 bytes) demuxed
Output file #0 (/dev/null):
Output stream #0:0 (audio): 1999 packets muxed (767616 bytes);
Total: 1999 packets (767616 bytes) muxed
0 frames successfully decoded, 0 decoding errors
}}}
--
Ticket URL: <https://trac.ffmpeg.org/ticket/11434>
FFmpeg <https://ffmpeg.org>
FFmpeg issue tracker
More information about the FFmpeg-trac
mailing list