[FFmpeg-user] ffmpeg read from UDP/Port
Maziar Mehrabi
mmehrabi at abo.fi
Tue Sep 23 07:05:01 CEST 2014
Hi,
Try testing it over http first, rather than UDP or RTP. What I understand
is that the errors somehow are related to audio channel, and RTP divides
the media into two streams (one audio and one video) and sends them through
separate ports, so I guess you should have some sort of mechanism on the
other end to capture and mix these two streams.
One other way to test this idea is to use the -an option while you are
streaming media, this option means "No Audio" and will just stream the
video channel.
if you please, keep me updated about your results.
BR,
Maziar
--
Hälsningar,
Maziar Mehrabi
On Tue, Sep 23, 2014 at 2:38 AM, Alex Lin <op1031 at gmail.com> wrote:
> Hi Bill,
>
> >> I might be tempted to set both video and audio codec to copy, and save
> in a .TS file without -f at all.
> I did a look search on google about .ts files. My understanding is that, I
> can use videosnarf to convert a packet trace to .TS file. Is that the way
> you have in mind as well?
>
> Thank you,
> AL
>
> On Fri, Sep 19, 2014 at 12:19 PM, Bill Davidsen <davidsen at tmr.com> wrote:
>
> > Alex Lin wrote:
> >
> >> Hi all,
> >>
> >> I am using Windows 7 64 bit, and I downloaded the 64 bit version of
> >> ffmpeg: ffmpeg-20140916-git-b76d613-win64-static.7z
> >>
> >> I have spent the entire day experimenting with ffmpeg today but I
> haven't
> >> quite figure out if ffmpeg is the right solution to my problem yet, so I
> >> would like to get some opinions.
> >>
> >> I am receiving H264 encoded packets through RTP with sample rate of
> >> 90,000,
> >> and I need to record these packets. The file format doesn't really
> matter
> >> at this point.
> >>
> >> Currently, I have a server sending the H264 packets to port 50002 of my
> >> machine (192.168.1.200), so I run the following ffmpeg command on my
> >> machine:
> >>
> >> ffmpeg -i udp://192.168.1.200:50002 -f mp4 hello.mp4
> >>
> >
> > I might be tempted to set both video and audio codec to copy, and save in
> > a .TS file without -f at all.
> > If that works you can capture the information and then play with it from
> > the file. I am a Linux user,
> > so you may need guidance for Windows issues from an expert, but if you
> can
> > capture the data you
> > eliminate some possible problems by not reformatting the data at capture.
> >
> >
> >> Then the following shows
> >>
> >> ffmpeg version N-66289-gb76d613 Copyright (c) 2000-2014 the FFmpeg
> >> developers
> >> built on Sep 15 2014 22:11:04 with gcc 4.8.3 (GCC)
> >> configuration: --enable-gpl --enable-version3 --disable-w32threads
> >> --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r
> >> --enable-gnutls --enable-iconv --enable-libass --enable-libbluray
> >> --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme
> >> --enable-libgsm --enable-
> >> libilbc --enable-libmodplug --enable-libmp3lame
> --enable-libopencore-amrnb
> >> --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus
> >> --enable-librtmp --enable-libschroedinger --enable-libsoxr
> >> --enable-libspeex --enable-libtheora --enable-libtwolame
> >> --enable-libvidstab --enable-libvo-aacenc --
> >> enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx
> >> --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265
> >> --enable-libxavs --enable-libxvid --enable-decklink --enable-zlib
> >> libavutil 54. 7.100 / 54. 7.100
> >> libavcodec 56. 1.100 / 56. 1.100
> >> libavformat 56. 4.101 / 56. 4.101
> >> libavdevice 56. 0.100 / 56. 0.100
> >> libavfilter 5. 1.100 / 5. 1.100
> >> libswscale 3. 0.100 / 3. 0.100
> >> libswresample 1. 1.100 / 1. 1.100
> >> libpostproc 53. 0.100 / 53. 0.100
> >>
> >> The server starts sending video packets, and nothing happens on the
> >> command
> >> prompt with the ffmpeg command.
> >> The server stops sending video packets, and nothing happens still (I
> >> waited
> >> for at least 5 minutes), so I pressed Ctrl+C, then I see this
> >>
> >> udp://192.168.1.200:50002: Invalid data found when processing input
> >> Received signal 2: terminating.
> >>
> >> am I using ffmpeg correctly? and are the H264 packets I am receiving not
> >> supported?
> >> I have looked around and did not see any debug log generated by ffmpeg,
> so
> >> I don't really know where else to look.
> >> If it is necessary, I can provide a packet capture with the H264
> packets.
> >>
> >>
> > --
> > bill davidsen <davidsen at tmr.com>
> > CTO TMR Associates, Inc
> > Unsigned numbers may not be negative. However, unsigned numbers may be
> > less than zero for suffiently large values of zero.
> >
> >
> > _______________________________________________
> > ffmpeg-user mailing list
> > ffmpeg-user at ffmpeg.org
> > http://ffmpeg.org/mailman/listinfo/ffmpeg-user
> >
> _______________________________________________
> ffmpeg-user mailing list
> ffmpeg-user at ffmpeg.org
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
>
More information about the ffmpeg-user
mailing list