[FFmpeg-user] ffserver network issues

Da Rock ffmpeg-user at herveybayaustralia.com.au
Sun Nov 27 12:50:19 CET 2011


I got back to an old project I've been fiddling with for some time now, 
but ffserver doesn't appear to be doing so well now. I've run some 
updates, new platform, and new platform versions and I've done ok until now.

When I first kicked ffserver off it refused to bind to the network at 
all, after some retries, searching through confs, it worked- not sure 
what the failure was after all that.

When I started sending data to the server using ffmpeg I get the 
following error:

av_interleaved_write_frame(): Connection reset by peer

My data is gstreamer pipelined dvb stream with ffmpeg splitting and 
processing to mpegts output, although I have another method which 
essentially has the same result anyway- gstreamer drops the pipe when 
the buffers fill because ffmpeg doesn't take the data from the pipe. Cmd 
is as follows:

gst-launch dvbsrc adapter=1 frequency=xxxxxxxx modulation="QAM 64" 
bandwidth=7 guard=16 ! queue ! fdsink | ffmpeg -i - -f mpegts -vsync 0 
-vcodec copy -acodec copy -map_metadata 0:p:1601 
http://127.0.0.1:8090/stream1.ffm -f mpegts -vsync 0 -vcodec copy 
-acodec copy -map_metadata 0:p:1605 http://127.0.0.1:8090/stream2.ffm -f 
mpegts -vsync 0 -vcodec copy -acodec copy -map_metadata 0:p:1608 
http://127.0.0.1:8090/stream3.ffm

If I output to file it all goes beautifully.

Does anyone have any clues on this? Any help would be much appreciated.

I also could use some help as to where the logs are going as well?

Cheers

My platform is this:

FreeBSD <server> 8.1-RELEASE-p1 FreeBSD 8.1-RELEASE-p1
ffmpeg version 0.7.7, Copyright (c) 2000-2011 the FFmpeg developers
   built on Nov 26 2011 12:45:06 with gcc 4.2.1 20070719  [FreeBSD]
   configuration: --prefix=/usr/local --mandir=/usr/local/man 
--enable-shared --enable-gpl --enable-postproc --enable-avfilter 
--enable-pthreads --enable-x11grab --enable-memalign-hack 
--enable-runtime-cpudetect --cc=cc --extra-cflags='-msse 
-I/usr/local/include/vorbis -I/usr/local/include' 
--extra-ldflags='-L/usr/local/lib ' --extra-libs=-pthread 
--disable-debug --enable-libaacplus --disable-indev=alsa 
--disable-outdev=alsa --enable-libopencore-amrnb 
--enable-libopencore-amrwb --enable-libcelt --enable-libdirac 
--enable-libfaac --enable-libfreetype --enable-frei0r --enable-libgsm 
--enable-libmp3lame --enable-libopencv --enable-libopenjpeg 
--enable-librtmp --enable-libschroedinger --disable-ffplay 
--enable-libspeex --enable-libtheora --disable-vaapi --disable-vdpau 
--enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis 
--enable-libvpx --enable-libx264 --enable-libxvid --enable-nonfree 
--enable-version3
   libavutil    50. 43. 0 / 50. 43. 0
   libavcodec   52.122. 0 / 52.122. 0
   libavformat  52.110. 0 / 52.110. 0
   libavdevice  52.  5. 0 / 52.  5. 0
   libavfilter   1. 80. 0 /  1. 80. 0
   libswscale    0. 14. 1 /  0. 14. 1
   libpostproc  51.  2. 0 / 51.  2. 0
ffserver version 0.7.7, Copyright (c) 2000-2011 the FFmpeg developers
   built on Nov 26 2011 12:45:06 with gcc 4.2.1 20070719  [FreeBSD]
   configuration: --prefix=/usr/local --mandir=/usr/local/man 
--enable-shared --enable-gpl --enable-postproc --enable-avfilter 
--enable-pthreads --enable-x11grab --enable-memalign-hack 
--enable-runtime-cpudetect --cc=cc --extra-cflags='-msse 
-I/usr/local/include/vorbis -I/usr/local/include' 
--extra-ldflags='-L/usr/local/lib ' --extra-libs=-pthread 
--disable-debug --enable-libaacplus --disable-indev=alsa 
--disable-outdev=alsa --enable-libopencore-amrnb 
--enable-libopencore-amrwb --enable-libcelt --enable-libdirac 
--enable-libfaac --enable-libfreetype --enable-frei0r --enable-libgsm 
--enable-libmp3lame --enable-libopencv --enable-libopenjpeg 
--enable-librtmp --enable-libschroedinger --disable-ffplay 
--enable-libspeex --enable-libtheora --disable-vaapi --disable-vdpau 
--enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis 
--enable-libvpx --enable-libx264 --enable-libxvid --enable-nonfree 
--enable-version3
   libavutil    50. 43. 0 / 50. 43. 0
   libavcodec   52.122. 0 / 52.122. 0
   libavformat  52.110. 0 / 52.110. 0
   libavdevice  52.  5. 0 / 52.  5. 0
   libavfilter   1. 80. 0 /  1. 80. 0
   libswscale    0. 14. 1 /  0. 14. 1
   libpostproc  51.  2. 0 / 51.  2. 0

Config:

# Port on which the server is listening. You must select a different
# port from your standard HTTP web server if it is running on the same
# computer.
Port 8090

# Address on which the server is bound. Only useful if you have
# several network interfaces.
BindAddress 0.0.0.0

# Number of simultaneous HTTP connections that can be handled. It has
# to be defined *before* the MaxClients parameter, since it defines the
# MaxClients maximum limit.
MaxHTTPConnections 2000

# Number of simultaneous requests that can be handled. Since FFServer
# is very fast, it is more likely that you will want to leave this high
# and use MaxBandwidth, below.
MaxClients 1000

# This the maximum amount of kbit/sec that you are prepared to
# consume when streaming to clients.
MaxBandwidth 500000

# Access log file (uses standard Apache log file format)
# '-' is the standard output.
CustomLog -

# Suppress that if you want to launch ffserver as a daemon.
NoDaemon


##################################################################
# Definition of the live feeds. Each live feed contains one video
# and/or audio sequence coming from an ffmpeg encoder or another
# ffserver. This sequence may be encoded simultaneously with several
# codecs at several resolutions.

<Feed feed1.ffm>

# You must use 'ffmpeg' to send a live feed to ffserver. In this
# example, you can type:
#
# ffmpeg http://localhost:8090/feed1.ffm

# ffserver can also do time shifting. It means that it can stream any
# previously recorded live stream. The request should contain:
# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
# a path where the feed is stored on disk. You also specify the
# maximum size of the feed, where zero means unlimited. Default:
# File=/tmp/feed_name.ffm FileMaxSize=5M
File /tmp/feed1.ffm
FileMaxSize 512M

# You could specify
# ReadOnlyFile /saved/specialvideo.ffm
# This marks the file as readonly and it will not be deleted or updated.

# Specify launch in order to start ffmpeg automatically.
# First ffmpeg must be defined with an appropriate path if needed,
# after that options can follow, but avoid adding the http:// field
#Launch ffmpeg

# Only allow connections from localhost to the feed.
ACL allow 192.168.0.0 255.255.255.0
ACL allow 127.0.0.1

</Feed>

<Feed stream2.ffm>

# Set file size to 2.25G
File /home/share/stream2.ffm
FileMaxSize 2304M

ACL allow 192.168.0.0 255.255.255.0
ACL allow 127.0.0.1

</Feed>

<Feed stream3.ffm>

# Set file size to 2.25G
File /home/share/stream3.ffm
FileMaxSize 2304M

ACL allow 192.168.0.0 255.255.255.0
ACL allow 127.0.0.1

</Feed>

<Feed stream1.ffm>

# Set file size to 6.5G
File /home/share/stream1.ffm
FileMaxSize 6656M

ACL allow 192.168.0.0 255.255.255.0
ACL allow 127.0.0.1

</Feed>


##################################################################
# Now you can define each stream which will be generated from the
# original audio and video stream. Each format has a filename (here
# 'test1.mpg'). FFServer will send this stream when answering a
# request containing this filename.

<Stream test1.mpg>

# coming from live feed 'feed1'
Feed feed1.ffm

# Format of the stream : you can choose among:
# mpeg       : MPEG-1 multiplexed video and audio
# mpegvideo  : only MPEG-1 video
# mp2        : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)
# ogg        : Ogg format (Vorbis audio codec)
# rm         : RealNetworks-compatible stream. Multiplexed audio and video.
# ra         : RealNetworks-compatible stream. Audio only.
# mpjpeg     : Multipart JPEG (works with Netscape without any plugin)
# jpeg       : Generate a single JPEG image.
# asf        : ASF compatible streaming (Windows Media Player format).
# swf        : Macromedia Flash compatible stream
# avi        : AVI format (MPEG-4 video, MPEG audio sound)
Format mpeg

# Bitrate for the audio stream. Codecs usually support only a few
# different bitrates.
AudioBitRate 192

# Number of audio channels: 1 = mono, 2 = stereo
AudioChannels 2

# Sampling frequency for audio. When using low bitrates, you should
# lower this frequency to 22050 or 11025. The supported frequencies
# depend on the selected audio codec.
AudioSampleRate 44100

# Bitrate for the video stream
VideoBitRate 1000

# Ratecontrol buffer size
VideoBufferSize 40

# Number of frames per second
VideoFrameRate 25

# Size of the video frame: WxH (default: 160x128)
# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,
# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,
# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,
# hd1080
VideoSize 160x128

# Transmit only intra frames (useful for low bitrates, but kills frame 
rate).
#VideoIntraOnly

# If non-intra only, an intra frame is transmitted every VideoGopSize
# frames. Video synchronization can only begin at an intra frame.
VideoGopSize 12

# More MPEG-4 parameters
# VideoHighQuality
# Video4MotionVector

# Choose your codecs:
#AudioCodec mp2
#VideoCodec mpeg1video

# Suppress audio
#NoAudio

# Suppress video
#NoVideo

#VideoQMin 3
#VideoQMax 31

# Set this to the number of seconds backwards in time to start. Note that
# most players will buffer 5-10 seconds of video, and also you need to allow
# for a keyframe to appear in the data stream.
#Preroll 15

# ACL:

# You can allow ranges of addresses (or single addresses)
#ACL ALLOW <first address> <last address>

# You can deny ranges of addresses (or single addresses)
#ACL DENY <first address> <last address>

# You can repeat the ACL allow/deny as often as you like. It is on a per
# stream basis. The first match defines the action. If there are no matches,
# then the default is the inverse of the last ACL statement.
#
# Thus 'ACL allow localhost' only allows access from localhost.
# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and
# allow everybody else.

</Stream>


##################################################################
# Example streams


# Multipart JPEG

#<Stream test.mjpg>
#Feed feed1.ffm
#Format mpjpeg
#VideoFrameRate 2
#VideoIntraOnly
#NoAudio
#Strict -1
#</Stream>


# Single JPEG

#<Stream test.jpg>
#Feed feed1.ffm
#Format jpeg
#VideoFrameRate 2
#VideoIntraOnly
##VideoSize 352x240
#NoAudio
#Strict -1
#</Stream>


# Flash

<Stream test.swf>
Feed feed1.ffm
Format swf
VideoFrameRate 25
#VideoIntraOnly
VideoCodec libx264
AudioCodec libmp3lame
VideoSize hd720
VideoBitRate 1200
#NoAudio
ACL allow 192.168.0.0 255.255.255.0
</Stream>


# ASF compatible

#<Stream test.asf>
#Feed feed1.ffm
#Format asf
#VideoFrameRate 15
#VideoSize 352x240
#VideoBitRate 256
#VideoBufferSize 40
#VideoGopSize 30
#AudioBitRate 64
#StartSendOnKey
#</Stream>


# MP3 audio

#<Stream test.mp3>
#Feed feed1.ffm
#Format mp2
#AudioCodec mp3
#AudioBitRate 64
#AudioChannels 1
#AudioSampleRate 44100
#NoVideo
#</Stream>


# Ogg Vorbis audio

#<Stream test.ogg>
#Feed feed1.ffm
#Title "Stream title"
#AudioBitRate 64
#AudioChannels 2
#AudioSampleRate 44100
#NoVideo
#</Stream>


# Real with audio only at 32 kbits

#<Stream test.ra>
#Feed feed1.ffm
#Format rm
#AudioBitRate 32
#NoVideo
#NoAudio
#</Stream>


# Real with audio and video at 64 kbits

#<Stream test.rm>
#Feed feed1.ffm
#Format rm
#AudioBitRate 32
#VideoBitRate 128
#VideoFrameRate 25
#VideoGopSize 25
#NoAudio
#</Stream>


##################################################################
# Local Streams

<Stream stream2.mpg>
Feed ten.ffm
Format mp2
ACL allow 192.168.0.0 255.255.255.0
ACL allow 127.0.0.1
</Stream>

<Stream stream3.mpg>
Feed eleven.ffm
Format mp2
ACL allow 192.168.0.0 255.255.255.0
ACL allow 127.0.0.1
</Stream>

<Stream stream1.mpg>
Feed one.ffm
Format mp2
ACL allow 192.168.0.0 255.255.255.0
ACL allow 127.0.0.1
</Stream>

##################################################################
# A stream coming from a file: you only need to set the input
# filename and optionally a new format. Supported conversions:
#    AVI -> ASF

#<Stream file.rm>
#File "/usr/local/httpd/htdocs/tlive.rm"
#NoAudio
#</Stream>

#<Stream file.asf>
#File "/usr/local/httpd/htdocs/test.asf"
#NoAudio
#Author "Me"
#Copyright "Super MegaCorp"
#Title "Test stream from disk"
#Comment "Test comment"
#</Stream>


##################################################################
# RTSP examples
#
# You can access this stream with the RTSP URL:
#   rtsp://localhost:5454/test1-rtsp.mpg
#
# A non-standard RTSP redirector is also created. Its URL is:
#   http://localhost:8090/test1-rtsp.rtsp

#<Stream test1-rtsp.mpg>
#Format rtp
#File "/usr/local/httpd/htdocs/test1.mpg"
#</Stream>


##################################################################
# SDP/multicast examples
#
# If you want to send your stream in multicast, you must set the
# multicast address with MulticastAddress. The port and the TTL can
# also be set.
#
# An SDP file is automatically generated by ffserver by adding the
# 'sdp' extension to the stream name (here
# http://localhost:8090/test1-sdp.sdp). You should usually give this
# file to your player to play the stream.
#
# The 'NoLoop' option can be used to avoid looping when the stream is
# terminated.

#<Stream test1-sdp.mpg>
#Format rtp
#File "/usr/local/httpd/htdocs/test1.mpg"
#MulticastAddress 224.124.0.1
#MulticastPort 5000
#MulticastTTL 16
#NoLoop
#</Stream>


##################################################################
# Special streams

# Server status

<Stream stat.html>
Format status

# Only allow local people to get the status
ACL allow localhost
ACL allow 192.168.0.0 192.168.255.255

#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
</Stream>


# Redirect index.html to the appropriate site

<Redirect index.html>
URL http://<server>/<dir>
</Redirect>



More information about the ffmpeg-user mailing list