FFmpeg
|
#include "libavcodec/avcodec.h"
#include "avformat.h"
#include "rtp.h"
#include "url.h"
#include "srtp.h"
Go to the source code of this file.
Data Structures | |
struct | RTPStatistics |
struct | RTPDynamicProtocolHandler |
struct | RTPPacket |
struct | RTPDemuxContext |
Macros | |
#define | RTP_MIN_PACKET_LENGTH 12 |
#define | RTP_MAX_PACKET_LENGTH 1500 |
#define | RTP_REORDER_QUEUE_DEFAULT_SIZE 10 |
#define | RTP_NOTS_VALUE ((uint32_t)-1) |
#define | RTP_FLAG_KEY 0x1 |
RTP packet contains a keyframe. | |
#define | RTP_FLAG_MARKER 0x2 |
RTP marker bit was set for this packet. | |
Typedefs | |
typedef int(* | DynamicPayloadPacketHandlerProc )(AVFormatContext *ctx, PayloadContext *s, AVStream *st, AVPacket *pkt, uint32_t *timestamp, const uint8_t *buf, int len, uint16_t seq, int flags) |
Packet parsing for "private" payloads in the RTP specs. | |
Functions | |
RTPDemuxContext * | ff_rtp_parse_open (AVFormatContext *s1, AVStream *st, int payload_type, int queue_size) |
open a new RTP parse context for stream 'st'. | |
void | ff_rtp_parse_set_dynamic_protocol (RTPDemuxContext *s, PayloadContext *ctx, RTPDynamicProtocolHandler *handler) |
void | ff_rtp_parse_set_crypto (RTPDemuxContext *s, const char *suite, const char *params) |
int | ff_rtp_parse_packet (RTPDemuxContext *s, AVPacket *pkt, uint8_t **buf, int len) |
Parse an RTP or RTCP packet directly sent as a buffer. | |
void | ff_rtp_parse_close (RTPDemuxContext *s) |
int64_t | ff_rtp_queued_packet_time (RTPDemuxContext *s) |
void | ff_rtp_reset_packet_queue (RTPDemuxContext *s) |
int | ff_rtp_get_local_rtp_port (URLContext *h) |
Return the local rtp port used by the RTP connection. | |
int | ff_rtp_get_local_rtcp_port (URLContext *h) |
Return the local rtcp port used by the RTP connection. | |
int | ff_rtp_set_remote_url (URLContext *h, const char *uri) |
If no filename is given to av_open_input_file because you want to get the local port first, then you must call this function to set the remote server address. | |
void | ff_rtp_send_punch_packets (URLContext *rtp_handle) |
Send a dummy packet on both port pairs to set up the connection state in potential NAT routers, so that we're able to receive packets. | |
int | ff_rtp_check_and_send_back_rr (RTPDemuxContext *s, URLContext *fd, AVIOContext *avio, int count) |
some rtp servers assume client is dead if they don't hear from them... | |
int | ff_rtp_send_rtcp_feedback (RTPDemuxContext *s, URLContext *fd, AVIOContext *avio) |
void | ff_register_dynamic_payload_handler (RTPDynamicProtocolHandler *handler) |
RTPDynamicProtocolHandler * | ff_rtp_handler_find_by_name (const char *name, enum AVMediaType codec_type) |
RTPDynamicProtocolHandler * | ff_rtp_handler_find_by_id (int id, enum AVMediaType codec_type) |
int | ff_rtsp_next_attr_and_value (const char **p, char *attr, int attr_size, char *value, int value_size) |
int | ff_parse_fmtp (AVStream *stream, PayloadContext *data, const char *p, int(*parse_fmtp)(AVStream *stream, PayloadContext *data, char *attr, char *value)) |
void | av_register_rtp_dynamic_payload_handlers (void) |
int | ff_rtp_finalize_packet (AVPacket *pkt, AVIOContext **dyn_buf, int stream_idx) |
Close the dynamic buffer and make a packet from it. | |
#define RTP_MAX_PACKET_LENGTH 1500 |
Definition at line 36 of file rtpdec.h.
Referenced by rtp_parse_mp4_au().
#define RTP_REORDER_QUEUE_DEFAULT_SIZE 10 |
Definition at line 38 of file rtpdec.h.
Referenced by ff_rtsp_open_transport_ctx().
#define RTP_NOTS_VALUE ((uint32_t)-1) |
Definition at line 40 of file rtpdec.h.
Referenced by finalize_packet(), mpegts_handle_packet(), qdm2_parse_packet(), rtp_parse_one_packet(), and store_packet().
#define RTP_FLAG_KEY 0x1 |
RTP packet contains a keyframe.
Definition at line 96 of file rtpdec.h.
Referenced by asfrtp_parse_packet(), ff_rdt_parse_packet(), qt_rtp_parse_packet(), and rdt_parse_packet().
#define RTP_FLAG_MARKER 0x2 |
RTP marker bit was set for this packet.
Definition at line 97 of file rtpdec.h.
Referenced by asfrtp_parse_packet(), h263_handle_packet(), jpeg_parse_packet(), latm_parse_packet(), qt_rtp_parse_packet(), rtp_parse_packet_internal(), and vp8_handle_packet().
typedef int(* DynamicPayloadPacketHandlerProc)(AVFormatContext *ctx, PayloadContext *s, AVStream *st, AVPacket *pkt, uint32_t *timestamp, const uint8_t *buf, int len, uint16_t seq, int flags) |
Packet parsing for "private" payloads in the RTP specs.
ctx | RTSP demuxer context |
s | stream context |
st | stream that this packet belongs to |
pkt | packet in which to write the parsed data |
timestamp | pointer to the RTP timestamp of the input data, can be updated by the function if returning older, buffered data |
buf | pointer to raw RTP packet data |
len | length of buf |
seq | RTP sequence number of the packet |
flags | flags from the RTP packet header (RTP_FLAG_*) |
RTPDemuxContext* ff_rtp_parse_open | ( | AVFormatContext * | s1, |
AVStream * | st, | ||
int | payload_type, | ||
int | queue_size | ||
) |
open a new RTP parse context for stream 'st'.
'st' can be NULL for MPEG2-TS streams.
Definition at line 488 of file rtpdec.c.
Referenced by ff_rtsp_open_transport_ctx().
void ff_rtp_parse_set_dynamic_protocol | ( | RTPDemuxContext * | s, |
PayloadContext * | ctx, | ||
RTPDynamicProtocolHandler * | handler | ||
) |
Definition at line 520 of file rtpdec.c.
Referenced by ff_rtsp_open_transport_ctx().
void ff_rtp_parse_set_crypto | ( | RTPDemuxContext * | s, |
const char * | suite, | ||
const char * | params | ||
) |
Definition at line 527 of file rtpdec.c.
Referenced by ff_rtsp_open_transport_ctx().
int ff_rtp_parse_packet | ( | RTPDemuxContext * | s, |
AVPacket * | pkt, | ||
uint8_t ** | bufptr, | ||
int | len | ||
) |
Parse an RTP or RTCP packet directly sent as a buffer.
s | RTP parse context. |
pkt | returned packet |
bufptr | pointer to the input buffer or NULL to read the next packets |
len | buffer len |
void ff_rtp_parse_close | ( | RTPDemuxContext * | s | ) |
Definition at line 822 of file rtpdec.c.
Referenced by ff_rtsp_undo_setup().
int64_t ff_rtp_queued_packet_time | ( | RTPDemuxContext * | s | ) |
void ff_rtp_reset_packet_queue | ( | RTPDemuxContext * | s | ) |
Definition at line 656 of file rtpdec.c.
Referenced by ff_rtp_parse_close(), and rtsp_read_play().
int ff_rtp_get_local_rtp_port | ( | URLContext * | h | ) |
Return the local rtp port used by the RTP connection.
h | media file context |
Definition at line 292 of file rtpproto.c.
Referenced by rtsp_cmd_setup(), and rtsp_read_setup().
int ff_rtp_get_local_rtcp_port | ( | URLContext * | h | ) |
Return the local rtcp port used by the RTP connection.
h | media file context |
Definition at line 304 of file rtpproto.c.
Referenced by rtsp_cmd_setup().
int ff_rtp_set_remote_url | ( | URLContext * | h, |
const char * | uri | ||
) |
If no filename is given to av_open_input_file because you want to get the local port first, then you must call this function to set the remote server address.
h | media file context |
uri | of the remote server |
Definition at line 58 of file rtpproto.c.
void ff_rtp_send_punch_packets | ( | URLContext * | rtp_handle | ) |
Send a dummy packet on both port pairs to set up the connection state in potential NAT routers, so that we're able to receive packets.
Note, this only works if the NAT router doesn't remap ports. This isn't a standardized procedure, but it works in many cases in practice.
The same routine is used with RDT too, even if RDT doesn't use normal RTP packets otherwise.
int ff_rtp_check_and_send_back_rr | ( | RTPDemuxContext * | s, |
URLContext * | fd, | ||
AVIOContext * | avio, | ||
int | count | ||
) |
some rtp servers assume client is dead if they don't hear from them...
so we send a Receiver Report to the provided URLContext or AVIOContext (we don't have access to the rtcp handle from here)
int ff_rtp_send_rtcp_feedback | ( | RTPDemuxContext * | s, |
URLContext * | fd, | ||
AVIOContext * | avio | ||
) |
void ff_register_dynamic_payload_handler | ( | RTPDynamicProtocolHandler * | handler | ) |
Definition at line 55 of file rtpdec.c.
Referenced by av_register_rdt_dynamic_payload_handlers(), and av_register_rtp_dynamic_payload_handlers().
RTPDynamicProtocolHandler* ff_rtp_handler_find_by_name | ( | const char * | name, |
enum AVMediaType | codec_type | ||
) |
RTPDynamicProtocolHandler* ff_rtp_handler_find_by_id | ( | int | id, |
enum AVMediaType | codec_type | ||
) |
int ff_rtsp_next_attr_and_value | ( | const char ** | p, |
char * | attr, | ||
int | attr_size, | ||
char * | value, | ||
int | value_size | ||
) |
Referenced by ff_parse_fmtp().
int ff_parse_fmtp | ( | AVStream * | stream, |
PayloadContext * | data, | ||
const char * | p, | ||
int(*)(AVStream *stream, PayloadContext *data, char *attr, char *value) | parse_fmtp | ||
) |
Definition at line 829 of file rtpdec.c.
Referenced by amr_parse_sdp_line(), ilbc_parse_sdp_line(), latm_parse_sdp_line(), parse_h264_sdp_line(), parse_sdp_line(), and xiph_parse_sdp_line().
Definition at line 61 of file rtpdec.c.
Referenced by av_register_all().
int ff_rtp_finalize_packet | ( | AVPacket * | pkt, |
AVIOContext ** | dyn_buf, | ||
int | stream_idx | ||
) |
Close the dynamic buffer and make a packet from it.
Definition at line 865 of file rtpdec.c.
Referenced by h263_handle_packet(), jpeg_parse_packet(), svq3_parse_packet(), vp8_handle_packet(), and xiph_handle_packet().