FFmpeg
libspeexenc.c
Go to the documentation of this file.
1 /*
2  * Copyright (C) 2009 Justin Ruggles
3  * Copyright (c) 2009 Xuggle Incorporated
4  *
5  * This file is part of FFmpeg.
6  *
7  * FFmpeg is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU Lesser General Public
9  * License as published by the Free Software Foundation; either
10  * version 2.1 of the License, or (at your option) any later version.
11  *
12  * FFmpeg is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15  * Lesser General Public License for more details.
16  *
17  * You should have received a copy of the GNU Lesser General Public
18  * License along with FFmpeg; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
20  */
21 
22 /**
23  * @file
24  * libspeex Speex audio encoder
25  *
26  * Usage Guide
27  * This explains the values that need to be set prior to initialization in
28  * order to control various encoding parameters.
29  *
30  * Channels
31  * Speex only supports mono or stereo, so avctx->channels must be set to
32  * 1 or 2.
33  *
34  * Sample Rate / Encoding Mode
35  * Speex has 3 modes, each of which uses a specific sample rate.
36  * narrowband : 8 kHz
37  * wideband : 16 kHz
38  * ultra-wideband : 32 kHz
39  * avctx->sample_rate must be set to one of these 3 values. This will be
40  * used to set the encoding mode.
41  *
42  * Rate Control
43  * VBR mode is turned on by setting AV_CODEC_FLAG_QSCALE in avctx->flags.
44  * avctx->global_quality is used to set the encoding quality.
45  * For CBR mode, avctx->bit_rate can be used to set the constant bitrate.
46  * Alternatively, the 'cbr_quality' option can be set from 0 to 10 to set
47  * a constant bitrate based on quality.
48  * For ABR mode, set avctx->bit_rate and set the 'abr' option to 1.
49  * Approx. Bitrate Range:
50  * narrowband : 2400 - 25600 bps
51  * wideband : 4000 - 43200 bps
52  * ultra-wideband : 4400 - 45200 bps
53  *
54  * Complexity
55  * Encoding complexity is controlled by setting avctx->compression_level.
56  * The valid range is 0 to 10. A higher setting gives generally better
57  * quality at the expense of encoding speed. This does not affect the
58  * bit rate.
59  *
60  * Frames-per-Packet
61  * The encoder defaults to using 1 frame-per-packet. However, it is
62  * sometimes desirable to use multiple frames-per-packet to reduce the
63  * amount of container overhead. This can be done by setting the
64  * 'frames_per_packet' option to a value 1 to 8.
65  *
66  *
67  * Optional features
68  * Speex encoder supports several optional features, which can be useful
69  * for some conditions.
70  *
71  * Voice Activity Detection
72  * When enabled, voice activity detection detects whether the audio
73  * being encoded is speech or silence/background noise. VAD is always
74  * implicitly activated when encoding in VBR, so the option is only useful
75  * in non-VBR operation. In this case, Speex detects non-speech periods and
76  * encodes them with just enough bits to reproduce the background noise.
77  *
78  * Discontinuous Transmission (DTX)
79  * DTX is an addition to VAD/VBR operation, that makes it possible to stop transmitting
80  * completely when the background noise is stationary.
81  * In file-based operation only 5 bits are used for such frames.
82  */
83 
84 #include <speex/speex.h>
85 #include <speex/speex_header.h>
86 #include <speex/speex_stereo.h>
87 
89 #include "libavutil/common.h"
90 #include "libavutil/opt.h"
91 #include "avcodec.h"
92 #include "internal.h"
93 #include "audio_frame_queue.h"
94 
95 /* TODO: Think about converting abr, vad, dtx and such flags to a bit field */
96 typedef struct LibSpeexEncContext {
97  AVClass *class; ///< AVClass for private options
98  SpeexBits bits; ///< libspeex bitwriter context
99  SpeexHeader header; ///< libspeex header struct
100  void *enc_state; ///< libspeex encoder state
101  int frames_per_packet; ///< number of frames to encode in each packet
102  float vbr_quality; ///< VBR quality 0.0 to 10.0
103  int cbr_quality; ///< CBR quality 0 to 10
104  int abr; ///< flag to enable ABR
105  int vad; ///< flag to enable VAD
106  int dtx; ///< flag to enable DTX
107  int pkt_frame_count; ///< frame count for the current packet
108  AudioFrameQueue afq; ///< frame queue
110 
113 {
114  const char *mode_str = "unknown";
115 
116  av_log(avctx, AV_LOG_DEBUG, "channels: %d\n", avctx->channels);
117  switch (s->header.mode) {
118  case SPEEX_MODEID_NB: mode_str = "narrowband"; break;
119  case SPEEX_MODEID_WB: mode_str = "wideband"; break;
120  case SPEEX_MODEID_UWB: mode_str = "ultra-wideband"; break;
121  }
122  av_log(avctx, AV_LOG_DEBUG, "mode: %s\n", mode_str);
123  if (s->header.vbr) {
124  av_log(avctx, AV_LOG_DEBUG, "rate control: VBR\n");
125  av_log(avctx, AV_LOG_DEBUG, " quality: %f\n", s->vbr_quality);
126  } else if (s->abr) {
127  av_log(avctx, AV_LOG_DEBUG, "rate control: ABR\n");
128  av_log(avctx, AV_LOG_DEBUG, " bitrate: %"PRId64" bps\n", avctx->bit_rate);
129  } else {
130  av_log(avctx, AV_LOG_DEBUG, "rate control: CBR\n");
131  av_log(avctx, AV_LOG_DEBUG, " bitrate: %"PRId64" bps\n", avctx->bit_rate);
132  }
133  av_log(avctx, AV_LOG_DEBUG, "complexity: %d\n",
134  avctx->compression_level);
135  av_log(avctx, AV_LOG_DEBUG, "frame size: %d samples\n",
136  avctx->frame_size);
137  av_log(avctx, AV_LOG_DEBUG, "frames per packet: %d\n",
138  s->frames_per_packet);
139  av_log(avctx, AV_LOG_DEBUG, "packet size: %d\n",
140  avctx->frame_size * s->frames_per_packet);
141  av_log(avctx, AV_LOG_DEBUG, "voice activity detection: %d\n", s->vad);
142  av_log(avctx, AV_LOG_DEBUG, "discontinuous transmission: %d\n", s->dtx);
143 }
144 
146 {
147  LibSpeexEncContext *s = avctx->priv_data;
148  const SpeexMode *mode;
149  uint8_t *header_data;
150  int header_size;
151  int32_t complexity;
152 
153  /* channels */
154  if (avctx->channels < 1 || avctx->channels > 2) {
155  av_log(avctx, AV_LOG_ERROR, "Invalid channels (%d). Only stereo and "
156  "mono are supported\n", avctx->channels);
157  return AVERROR(EINVAL);
158  }
159 
160  /* sample rate and encoding mode */
161  switch (avctx->sample_rate) {
162  case 8000: mode = speex_lib_get_mode(SPEEX_MODEID_NB); break;
163  case 16000: mode = speex_lib_get_mode(SPEEX_MODEID_WB); break;
164  case 32000: mode = speex_lib_get_mode(SPEEX_MODEID_UWB); break;
165  default:
166  av_log(avctx, AV_LOG_ERROR, "Sample rate of %d Hz is not supported. "
167  "Resample to 8, 16, or 32 kHz.\n", avctx->sample_rate);
168  return AVERROR(EINVAL);
169  }
170 
171  /* initialize libspeex */
172  s->enc_state = speex_encoder_init(mode);
173  if (!s->enc_state) {
174  av_log(avctx, AV_LOG_ERROR, "Error initializing libspeex\n");
175  return -1;
176  }
177  speex_init_header(&s->header, avctx->sample_rate, avctx->channels, mode);
178 
179  /* rate control method and parameters */
180  if (avctx->flags & AV_CODEC_FLAG_QSCALE) {
181  /* VBR */
182  s->header.vbr = 1;
183  s->vad = 1; /* VAD is always implicitly activated for VBR */
184  speex_encoder_ctl(s->enc_state, SPEEX_SET_VBR, &s->header.vbr);
185  s->vbr_quality = av_clipf(avctx->global_quality / (float)FF_QP2LAMBDA,
186  0.0f, 10.0f);
187  speex_encoder_ctl(s->enc_state, SPEEX_SET_VBR_QUALITY, &s->vbr_quality);
188  } else {
189  s->header.bitrate = avctx->bit_rate;
190  if (avctx->bit_rate > 0) {
191  /* CBR or ABR by bitrate */
192  if (s->abr) {
193  speex_encoder_ctl(s->enc_state, SPEEX_SET_ABR,
194  &s->header.bitrate);
195  speex_encoder_ctl(s->enc_state, SPEEX_GET_ABR,
196  &s->header.bitrate);
197  } else {
198  speex_encoder_ctl(s->enc_state, SPEEX_SET_BITRATE,
199  &s->header.bitrate);
200  speex_encoder_ctl(s->enc_state, SPEEX_GET_BITRATE,
201  &s->header.bitrate);
202  }
203  } else {
204  /* CBR by quality */
205  speex_encoder_ctl(s->enc_state, SPEEX_SET_QUALITY,
206  &s->cbr_quality);
207  speex_encoder_ctl(s->enc_state, SPEEX_GET_BITRATE,
208  &s->header.bitrate);
209  }
210  /* stereo side information adds about 800 bps to the base bitrate */
211  /* TODO: this should be calculated exactly */
212  avctx->bit_rate = s->header.bitrate + (avctx->channels == 2 ? 800 : 0);
213  }
214 
215  /* VAD is activated with VBR or can be turned on by itself */
216  if (s->vad)
217  speex_encoder_ctl(s->enc_state, SPEEX_SET_VAD, &s->vad);
218 
219  /* Activating Discontinuous Transmission */
220  if (s->dtx) {
221  speex_encoder_ctl(s->enc_state, SPEEX_SET_DTX, &s->dtx);
222  if (!(s->abr || s->vad || s->header.vbr))
223  av_log(avctx, AV_LOG_WARNING, "DTX is not much of use without ABR, VAD or VBR\n");
224  }
225 
226  /* set encoding complexity */
228  complexity = av_clip(avctx->compression_level, 0, 10);
229  speex_encoder_ctl(s->enc_state, SPEEX_SET_COMPLEXITY, &complexity);
230  }
231  speex_encoder_ctl(s->enc_state, SPEEX_GET_COMPLEXITY, &complexity);
232  avctx->compression_level = complexity;
233 
234  /* set packet size */
235  avctx->frame_size = s->header.frame_size;
236  s->header.frames_per_packet = s->frames_per_packet;
237 
238  /* set encoding delay */
239  speex_encoder_ctl(s->enc_state, SPEEX_GET_LOOKAHEAD, &avctx->initial_padding);
240  ff_af_queue_init(avctx, &s->afq);
241 
242  /* create header packet bytes from header struct */
243  /* note: libspeex allocates the memory for header_data, which is freed
244  below with speex_header_free() */
245  header_data = speex_header_to_packet(&s->header, &header_size);
246 
247  /* allocate extradata */
248  avctx->extradata = av_malloc(header_size + AV_INPUT_BUFFER_PADDING_SIZE);
249  if (!avctx->extradata) {
250  speex_header_free(header_data);
251  speex_encoder_destroy(s->enc_state);
252  av_log(avctx, AV_LOG_ERROR, "memory allocation error\n");
253  return AVERROR(ENOMEM);
254  }
255 
256  /* copy header packet to extradata */
257  memcpy(avctx->extradata, header_data, header_size);
258  avctx->extradata_size = header_size;
259  speex_header_free(header_data);
260 
261  /* init libspeex bitwriter */
262  speex_bits_init(&s->bits);
263 
264  print_enc_params(avctx, s);
265  return 0;
266 }
267 
268 static int encode_frame(AVCodecContext *avctx, AVPacket *avpkt,
269  const AVFrame *frame, int *got_packet_ptr)
270 {
271  LibSpeexEncContext *s = avctx->priv_data;
272  int16_t *samples = frame ? (int16_t *)frame->data[0] : NULL;
273  int ret;
274 
275  if (samples) {
276  /* encode Speex frame */
277  if (avctx->channels == 2)
278  speex_encode_stereo_int(samples, s->header.frame_size, &s->bits);
279  speex_encode_int(s->enc_state, samples, &s->bits);
280  s->pkt_frame_count++;
281  if ((ret = ff_af_queue_add(&s->afq, frame)) < 0)
282  return ret;
283  } else {
284  /* handle end-of-stream */
285  if (!s->pkt_frame_count)
286  return 0;
287  /* add extra terminator codes for unused frames in last packet */
288  while (s->pkt_frame_count < s->frames_per_packet) {
289  speex_bits_pack(&s->bits, 15, 5);
290  s->pkt_frame_count++;
291  }
292  }
293 
294  /* write output if all frames for the packet have been encoded */
295  if (s->pkt_frame_count == s->frames_per_packet) {
296  s->pkt_frame_count = 0;
297  if ((ret = ff_alloc_packet2(avctx, avpkt, speex_bits_nbytes(&s->bits), 0)) < 0)
298  return ret;
299  ret = speex_bits_write(&s->bits, avpkt->data, avpkt->size);
300  speex_bits_reset(&s->bits);
301 
302  /* Get the next frame pts/duration */
303  ff_af_queue_remove(&s->afq, s->frames_per_packet * avctx->frame_size,
304  &avpkt->pts, &avpkt->duration);
305 
306  avpkt->size = ret;
307  *got_packet_ptr = 1;
308  return 0;
309  }
310  return 0;
311 }
312 
314 {
315  LibSpeexEncContext *s = avctx->priv_data;
316 
317  speex_bits_destroy(&s->bits);
318  speex_encoder_destroy(s->enc_state);
319 
320  ff_af_queue_close(&s->afq);
321  av_freep(&avctx->extradata);
322 
323  return 0;
324 }
325 
326 #define OFFSET(x) offsetof(LibSpeexEncContext, x)
327 #define AE AV_OPT_FLAG_AUDIO_PARAM | AV_OPT_FLAG_ENCODING_PARAM
328 static const AVOption options[] = {
329  { "abr", "Use average bit rate", OFFSET(abr), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 1, AE },
330  { "cbr_quality", "Set quality value (0 to 10) for CBR", OFFSET(cbr_quality), AV_OPT_TYPE_INT, { .i64 = 8 }, 0, 10, AE },
331  { "frames_per_packet", "Number of frames to encode in each packet", OFFSET(frames_per_packet), AV_OPT_TYPE_INT, { .i64 = 1 }, 1, 8, AE },
332  { "vad", "Voice Activity Detection", OFFSET(vad), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 1, AE },
333  { "dtx", "Discontinuous Transmission", OFFSET(dtx), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 1, AE },
334  { NULL },
335 };
336 
337 static const AVClass speex_class = {
338  .class_name = "libspeex",
339  .item_name = av_default_item_name,
340  .option = options,
341  .version = LIBAVUTIL_VERSION_INT,
342 };
343 
344 static const AVCodecDefault defaults[] = {
345  { "b", "0" },
346  { "compression_level", "3" },
347  { NULL },
348 };
349 
351  .name = "libspeex",
352  .long_name = NULL_IF_CONFIG_SMALL("libspeex Speex"),
353  .type = AVMEDIA_TYPE_AUDIO,
354  .id = AV_CODEC_ID_SPEEX,
355  .priv_data_size = sizeof(LibSpeexEncContext),
356  .init = encode_init,
357  .encode2 = encode_frame,
358  .close = encode_close,
359  .capabilities = AV_CODEC_CAP_DELAY,
360  .sample_fmts = (const enum AVSampleFormat[]){ AV_SAMPLE_FMT_S16,
362  .channel_layouts = (const uint64_t[]){ AV_CH_LAYOUT_MONO,
364  0 },
365  .supported_samplerates = (const int[]){ 8000, 16000, 32000, 0 },
366  .priv_class = &speex_class,
367  .defaults = defaults,
368  .wrapper_name = "libspeex",
369 };
AVCodecContext::frame_size
int frame_size
Number of samples per channel in an audio frame.
Definition: avcodec.h:1206
AVCodec
AVCodec.
Definition: codec.h:190
AV_LOG_WARNING
#define AV_LOG_WARNING
Something somehow does not look correct.
Definition: log.h:182
init
static av_cold int init(AVCodecContext *avctx)
Definition: avrndec.c:35
AVERROR
Filter the word “frame” indicates either a video frame or a group of audio as stored in an AVFrame structure Format for each input and each output the list of supported formats For video that means pixel format For audio that means channel sample they are references to shared objects When the negotiation mechanism computes the intersection of the formats supported at each end of a all references to both lists are replaced with a reference to the intersection And when a single format is eventually chosen for a link amongst the remaining all references to the list are updated That means that if a filter requires that its input and output have the same format amongst a supported all it has to do is use a reference to the same list of formats query_formats can leave some formats unset and return AVERROR(EAGAIN) to cause the negotiation mechanism toagain later. That can be used by filters with complex requirements to use the format negotiated on one link to set the formats supported on another. Frame references ownership and permissions
opt.h
ff_af_queue_remove
void ff_af_queue_remove(AudioFrameQueue *afq, int nb_samples, int64_t *pts, int64_t *duration)
Remove frame(s) from the queue.
Definition: audio_frame_queue.c:75
AVCodecContext::sample_rate
int sample_rate
samples per second
Definition: avcodec.h:1186
ff_af_queue_close
void ff_af_queue_close(AudioFrameQueue *afq)
Close AudioFrameQueue.
Definition: audio_frame_queue.c:36
sample_fmts
static enum AVSampleFormat sample_fmts[]
Definition: adpcmenc.c:716
AV_CH_LAYOUT_MONO
#define AV_CH_LAYOUT_MONO
Definition: channel_layout.h:85
AV_CODEC_FLAG_QSCALE
#define AV_CODEC_FLAG_QSCALE
Use fixed qscale.
Definition: avcodec.h:275
ff_af_queue_init
av_cold void ff_af_queue_init(AVCodecContext *avctx, AudioFrameQueue *afq)
Initialize AudioFrameQueue.
Definition: audio_frame_queue.c:28
ff_libspeex_encoder
AVCodec ff_libspeex_encoder
Definition: libspeexenc.c:350
print_enc_params
static av_cold void print_enc_params(AVCodecContext *avctx, LibSpeexEncContext *s)
Definition: libspeexenc.c:111
AVFrame
This structure describes decoded (raw) audio or video data.
Definition: frame.h:300
internal.h
AVPacket::data
uint8_t * data
Definition: packet.h:355
encode_close
static av_cold int encode_close(AVCodecContext *avctx)
Definition: libspeexenc.c:313
AVOption
AVOption.
Definition: opt.h:246
AVPacket::duration
int64_t duration
Duration of this packet in AVStream->time_base units, 0 if unknown.
Definition: packet.h:373
FF_COMPRESSION_DEFAULT
#define FF_COMPRESSION_DEFAULT
Definition: avcodec.h:599
av_malloc
#define av_malloc(s)
Definition: tableprint_vlc.h:31
AV_CODEC_ID_SPEEX
@ AV_CODEC_ID_SPEEX
Definition: codec_id.h:445
audio_frame_queue.h
AVCodecContext::initial_padding
int initial_padding
Audio only.
Definition: avcodec.h:2060
AE
#define AE
Definition: libspeexenc.c:327
AVCodecContext::flags
int flags
AV_CODEC_FLAG_*.
Definition: avcodec.h:606
ff_af_queue_add
int ff_af_queue_add(AudioFrameQueue *afq, const AVFrame *f)
Add a frame to the queue.
Definition: audio_frame_queue.c:44
AV_CH_LAYOUT_STEREO
#define AV_CH_LAYOUT_STEREO
Definition: channel_layout.h:86
AV_LOG_ERROR
#define AV_LOG_ERROR
Something went wrong and cannot losslessly be recovered.
Definition: log.h:176
av_cold
#define av_cold
Definition: attributes.h:90
LibSpeexEncContext::pkt_frame_count
int pkt_frame_count
frame count for the current packet
Definition: libspeexenc.c:107
AVCodecContext::extradata_size
int extradata_size
Definition: avcodec.h:628
s
#define s(width, name)
Definition: cbs_vp9.c:257
AVCodecContext::global_quality
int global_quality
Global quality for codecs which cannot change it per frame.
Definition: avcodec.h:592
LibSpeexEncContext::vad
int vad
flag to enable VAD
Definition: libspeexenc.c:105
AVMEDIA_TYPE_AUDIO
@ AVMEDIA_TYPE_AUDIO
Definition: avutil.h:202
AudioFrameQueue
Definition: audio_frame_queue.h:32
LibSpeexEncContext::abr
int abr
flag to enable ABR
Definition: libspeexenc.c:104
AV_LOG_DEBUG
#define AV_LOG_DEBUG
Stuff which is only useful for libav* developers.
Definition: log.h:197
options
static const AVOption options[]
Definition: libspeexenc.c:328
int32_t
int32_t
Definition: audio_convert.c:194
if
if(ret)
Definition: filter_design.txt:179
AVCodecDefault
Definition: internal.h:201
LIBAVUTIL_VERSION_INT
#define LIBAVUTIL_VERSION_INT
Definition: version.h:85
AVClass
Describe the class of an AVClass context structure.
Definition: log.h:67
NULL
#define NULL
Definition: coverity.c:32
LibSpeexEncContext::vbr_quality
float vbr_quality
VBR quality 0.0 to 10.0.
Definition: libspeexenc.c:102
AVCodecContext::bit_rate
int64_t bit_rate
the average bitrate
Definition: avcodec.h:576
av_default_item_name
const char * av_default_item_name(void *ptr)
Return the context name.
Definition: log.c:235
speex_class
static const AVClass speex_class
Definition: libspeexenc.c:337
defaults
static const AVCodecDefault defaults[]
Definition: libspeexenc.c:344
AVPacket::size
int size
Definition: packet.h:356
NULL_IF_CONFIG_SMALL
#define NULL_IF_CONFIG_SMALL(x)
Return NULL if CONFIG_SMALL is true, otherwise the argument without modification.
Definition: internal.h:188
LibSpeexEncContext::afq
AudioFrameQueue afq
frame queue
Definition: libspeexenc.c:108
AV_SAMPLE_FMT_NONE
@ AV_SAMPLE_FMT_NONE
Definition: samplefmt.h:59
LibSpeexEncContext::header
SpeexHeader header
libspeex header struct
Definition: libspeexenc.c:99
LibSpeexEncContext::bits
SpeexBits bits
libspeex bitwriter context
Definition: libspeexenc.c:98
AVCodecContext::channels
int channels
number of audio channels
Definition: avcodec.h:1187
LibSpeexEncContext::dtx
int dtx
flag to enable DTX
Definition: libspeexenc.c:106
AVPacket::pts
int64_t pts
Presentation timestamp in AVStream->time_base units; the time at which the decompressed packet will b...
Definition: packet.h:348
LibSpeexEncContext::frames_per_packet
int frames_per_packet
number of frames to encode in each packet
Definition: libspeexenc.c:101
AVCodecContext::extradata
uint8_t * extradata
some codecs need / can use extradata like Huffman tables.
Definition: avcodec.h:627
common.h
AVSampleFormat
AVSampleFormat
Audio sample formats.
Definition: samplefmt.h:58
uint8_t
uint8_t
Definition: audio_convert.c:194
AV_SAMPLE_FMT_S16
@ AV_SAMPLE_FMT_S16
signed 16 bits
Definition: samplefmt.h:61
AVCodec::name
const char * name
Name of the codec implementation.
Definition: codec.h:197
avcodec.h
ret
ret
Definition: filter_design.txt:187
AVClass::class_name
const char * class_name
The name of the class; usually it is the same name as the context structure type to which the AVClass...
Definition: log.h:72
frame
these buffered frames must be flushed immediately if a new input produces new the filter must not call request_frame to get more It must just process the frame or queue it The task of requesting more frames is left to the filter s request_frame method or the application If a filter has several the filter must be ready for frames arriving randomly on any input any filter with several inputs will most likely require some kind of queuing mechanism It is perfectly acceptable to have a limited queue and to drop frames when the inputs are too unbalanced request_frame For filters that do not use the this method is called when a frame is wanted on an output For a it should directly call filter_frame on the corresponding output For a if there are queued frames already one of these frames should be pushed If the filter should request a frame on one of its repeatedly until at least one frame has been pushed Return or at least make progress towards producing a frame
Definition: filter_design.txt:264
AV_INPUT_BUFFER_PADDING_SIZE
#define AV_INPUT_BUFFER_PADDING_SIZE
Definition: avcodec.h:215
encode_frame
static int encode_frame(AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame, int *got_packet_ptr)
Definition: libspeexenc.c:268
AVCodecContext
main external API structure.
Definition: avcodec.h:526
channel_layout.h
OFFSET
#define OFFSET(x)
Definition: libspeexenc.c:326
mode
mode
Definition: ebur128.h:83
AV_OPT_TYPE_INT
@ AV_OPT_TYPE_INT
Definition: opt.h:223
AV_CODEC_CAP_DELAY
#define AV_CODEC_CAP_DELAY
Encoder or decoder requires flushing with NULL input at the end in order to give the complete and cor...
Definition: codec.h:75
samples
Filter the word “frame” indicates either a video frame or a group of audio samples
Definition: filter_design.txt:8
LibSpeexEncContext::enc_state
void * enc_state
libspeex encoder state
Definition: libspeexenc.c:100
AVPacket
This structure stores compressed data.
Definition: packet.h:332
AVCodecContext::priv_data
void * priv_data
Definition: avcodec.h:553
av_freep
#define av_freep(p)
Definition: tableprint_vlc.h:35
LibSpeexEncContext::cbr_quality
int cbr_quality
CBR quality 0 to 10.
Definition: libspeexenc.c:103
av_log
#define av_log(a,...)
Definition: tableprint_vlc.h:28
LibSpeexEncContext
Definition: libspeexenc.c:96
encode_init
static av_cold int encode_init(AVCodecContext *avctx)
Definition: libspeexenc.c:145
FF_QP2LAMBDA
#define FF_QP2LAMBDA
factor to convert from H.263 QP to lambda
Definition: avutil.h:227
ff_alloc_packet2
int ff_alloc_packet2(AVCodecContext *avctx, AVPacket *avpkt, int64_t size, int64_t min_size)
Check AVPacket size and/or allocate data.
Definition: encode.c:32
AVCodecContext::compression_level
int compression_level
Definition: avcodec.h:598